Rear Wheels - Quadra byke QUAD-TRIKE-BIKE Owner's Handbook Manual

1 Wheel Front and Rear
Items Required
M Medium Axle Assembly for One wheel front and rear
Lock Nuts and Washers
1. Place wheel between bearings
as shown.
4. Thread Black Lock Nut onto
axle and ensure it is fully tighten
and secure
5. Now on the opposite side,
place a washer onto the axle
8
M
M
2. Insert Medium Axle through
wheel bearings and wheel
3. Place washer onto axle
6. Thread Black Lock Nut onto
axle and ensure it is fully tighten
and secure
NB. Now repeat the process for the front axle.
Always check that all Black Lock Nuts are tight
and secure before use

2 Rear Wheels

L Long Axle Rear for Four wheels Format
Black Nut and Washer for each side
1. Place the spacer as show
2. Insert axle marked 'L' passing
through wheel bearings and
spacer
6. Ensure that Black Locknut is
fully tigthen and secure
5. Thread Black Lock Nut onto
axle
7. Place wheel on the opposite
end of axle
7. Place washer onto axle
Items Required
L
Spacer
3. Place wheel onto axle
4. Place washer onto axle as
shown
8. Thread Black Lock Nut onto
axle and ensure that it is fully
tighten and secure
5