Advertisement
Swiss-Made In-Ear Monitors
harschacoustic
Route de Cossonay 36C
1040 Echallens
www.harschacoustic.ch
Switzerland
Maintenance
It is necessary to regularly remove cerumen (ear wax)
that can accumulate around the sound outlet.
To do this, use the metal part of the supplied cleaning
tool. Be careful not to push earwax into the sound
outlet, and not to force with the tool. This may damage
the internal components of your in-ear-monitors. Use
the brush tool to remove the loosened residue.
To clean the shells, use paper towel or soft tissue
slightly humid. If necessary, use a little soap or
dishwashing liquid. Make sure in any case that no
liquid enters the sound outlet and in the connectors.
! Do not put the in-ear monitors in liquid !
The warranty does not cover damage caused by
excessive earwax or improper cleaning.
Technical data
SH-2
Frequency response: 10Hz – 17kHz
Sensitivity: 113dB/mW
Impedance: 56 Ohms
SH-3
Frequency response: 10Hz – 18kHz
Sensitivity: 116dB/mW
Impedance: 25 Ohms
Advertisement
