Exile EXMC1 Owner's Manual

PAIRING YOUR DEVICE VIA BLUETOOTH®
(REQUIRED FOR OPERATION):
1. Ensure your streaming device has Bluetooth® enabled and
that power is applied to the EXMC1. (The red LED indicates the
EXMC1 is powered on and the blue LED will blink blue to indicate
it is in pairing mode.)
2. Within your streaming device's Bluetooth® setup menu, select
"EXILE-BT2" from the list of pairable devices. No Pin Code is
required.
3. When successfully connected, the Blue LED on the EXMC1 will
stop blinking and remain lit. Once a device is paired then each
time the device is seen by the EXMC1 it will automatically
reconnect to that device. If no devices are present the EXMC1
automatically goes into pairing mode and will present itself as
discoverable for the next device present.
© 2015 Exile Audio www.exileaudio.com
EXMC1 Owner's Manual
Bluetooth® Digital Media Center
Certification Number
QD025389
07/15