Page 2
This document has been prepared by SyxthSense Limited using (i) its own proprietary information and (ii) proprietary information owned and controlled by other third parties (for which SyxthSense Limited has a right to use). The contents are copyrighted and must not be communicated in whole or in part to any other party without the prior written approval of SyxthSense Limited.
The SDC-TS7 and also WiFi connectivity that allows the Tablet to be used as the WiFi access point. In this way it is possible to use the SDC-TS7 as the access point to navigate the graphics of the host system using mobile phones and other WiFi devices.
SDC-TS7 screen. See section Updating AutoWeb for details. 2. Setting Ethernet Device Address Before it is possible to connect the SDC-TS7 to the host controller, it is necessary to set up the SDC-TS7 IP address. To do this, select Android OS. Go to “Settings”.
The controller IP address stored in the AutoWeb application can be deleted under:- “Settings / Apps” And selecting “AutoWeb” and selecting “Clear Data”. Copyright 2013 SyxthSense Ltd. - Ver 0.2 Online Store: www.syxthsense.com Enquiries: T: 0844 840 3100 F: 0844 840 3200...
Copy the files to the MicroSD Card (min 1GB) unzipped as above. Power down SDC-TS7 Insert the MicroSD card to the SDC-TS7 (SD card holder is on the right hand side when you lift up the screen) Power Up the SDC-TS7, the new OS installation will automatically start...
Document Control Version Date Change History 29-Apr-2014 Original Release 09-Jun-2014 Upgrading the Firmware Details Added Copyright 2013 SyxthSense Ltd. - Ver 0.2 Online Store: www.syxthsense.com Enquiries: T: 0844 840 3100 F: 0844 840 3200 SDC-AN14 easyioKits User Manual...
Need help?
Do you have a question about the SDC-TS7 and is the answer not in the manual?
Questions and answers