Kenwood C-616DV Quick Start Manual

Quick Start Guide
Compact Hi-Fi Component System
C-616DV
What's in the Box? Follow the steps below to use your
Compact Hi-Fi Component System
You should fi nd these accessories upon opening the
box.
Connections
FM indoor antenna AM loop antenna
Setup
Setup
Setup
iPod Dock
AC adapter
Operation
(AC-18335A)
Remote control unit operation
Plug the power cord of the system to a power outlet and
press on the remote control unit to turn the system
Power cord
Remote control unit
ON. After the system is switched ON, press the desired
RC-F0512E
operation button. Use the remote control unit by pointing
it to the remote sensor on the main unit.
CONTRAST BACKLIGHT
SLEEP DISPLAY V.F.S Remote sensor
TUNER BAND USB/SD DVD D.AUDIO/iPod AUX SOUND
STOP X-BASS
DVD SETUP TOP MENU MENU
AUDIO ENTER VOLUME
SUBTITLE RETURN ON SCREEN MUTE
RESOLUTION
STEREO/MONO ABC DEF
RANDOM ZOOM GHI JKL MNO P.CALL FOLDER
MEMORY
REPEAT PQRS TUV WXYZ TIMER SET
ANGLE PTY FILE TIMER
P.MODE CLEAR SEARCH ON/OFF
30°
REMOTE CONTROL UNIT
RC-F0512E
Pull out the plastic protective
sheet before use.
B60-5822-08_00_C-616DV_QuickStart.indd 1-3 B60-5822-08_00_C-616DV_QuickStart.indd 1-3
Connections
Right speaker
To TV with video input
terminal
HDMI cord
Component Video
cord
Video cord
Video cord
Component Video cord
¤
CAUTION
Approx. 6 m
The power in this equipment will not be completely
cut off from the wall outlet when the standby switch is
turned off.
30°
Install the equipment so that the wall outlet is easily
accessible and, in case of emergency, immediately
unplug the power plug from the wall outlet.
Mains plug is used as the disconnect device, It shall
remain readily operable and should not be obstructed
REMOTE CONTROL UNIT during intended use.
© B60-5822-08/00 (E)
AM loop antenna
FM indoor antenna
Left speaker
AC adapter
Use the AC adapter (AC-18335A)
provided with this product.
Connect a subwoofer (SW-40HT
(separately available), etc.) to the
[SUB WOOFER PRE OUT] terminal
on the rear of the main unit.
Power cord
iPod dock Connect the audio
output of the VCR, etc.
To AC wall outlet
VIDEO COMPONENT VIDEO
to the [AUX IN] terminals
• Insert the plug firmly
Y Cb Cr
on the rear of the main
all the way into the
unit.
AC wall outlet.
¤
CAUTION
Be sure to adhere to the following, or proper
ventilation will be blocked causing damage or fi re
hazard (Main unit and AC adapter).
• Do not place a cloth on the system or place it on a
carpet or cushion.
• Do not use the system in a poorly ventilated place.
• Do not place any objects impairing heat radiation
onto the top of the unit.
• Leave some space around the unit (from the largest
outside dimension including projection) equal to or
greater than, shown below.
Top panel : 50 cm
¤
Connecting the FM antenna Caution for connection
FM
• Do not plug the power cord into the power outlet until
1 Connect the lead to the [FM 75Ω] terminal. 75 Ω
all other connections are completed. Before unplugging
2 Find the location that gives the best
a connected cord or cable, be sure to switch the system
reception.
OFF and unplug the power cord from the power outlet in
3 Secure the antenna as high up as possible.
advance.
• The antenna supplied with the system is a basic
antenna for indoor use. For stable signal reception, the
Connecting the iPod adapter
use of an outdoor antenna (commercially available) is
• Connect an iPod adapter, which is provided with your
recommended. Disconnect the indoor antenna first
iPod or commercially available in iPod dealers, to the
before connecting an outdoor antenna.
iPod dock of this unit. Note that the iPod adapter is not
¤ provided with this unit.
CAUTION on installing an outdoor antenna
•
Since antenna installation necessitates skill and
experience, always consult your dealer before 1 Insert the iPod adapter into
installation. The antenna should be placed at a distance unit.
from the power distribution wires. Otherwise, an electric
iPod adapter
shock accident may occur if the antenna falls down.
Connecting the AM antenna
1 Connect the AM antenna cord to the [AM] and [HGND]
terminals.
iPod dock
2 Setup the antenna in the position and the direction to To remove the iPod adapter
be able to receive AM broadcast.
• Insert a thin object such as the tip of a flat-blade
screwdriver into the slit on the dock adapter and lift it to
remove.
• The antenna supplied with the system is for indoor use.
Place it as far away as possible from the system, your
TV set, the speaker cords, AC adapter and the power
cord, and point it in the direction that provides the best
reception.
Connecting the speakers Connecting the HDMI terminal
1 Connect the right speaker to terminal marked "R", with 1 When you use HDMI connection, you can change the
the red wire to + and the black wire to –. resolution (576p, 720p, 1080i, 1080p) for the HDMI output.
2 Connect the left speaker to terminal marked "L", with the The HDMI will be outputted at 576p resolution, even if
red wire to + and the black wire to –. you set the resolution to 576i on the HDMI connection.
Insert this portion.
• When the no sound or noisy sound are outputted with
HDMI connection, set the HDMI AUDIO in DVD SETUP
menu to PCM.
• If there is noise or lines on the screen, please check the
HDMI cable.
• Not all HDCP-compatible DVI devices will work with this
unit.
• If your HDMI TV does not support HDCP, the blue screen
appears on the screen.
• If the abnormal picture appears on the TV screen, turn off
the unit and then turn the unit on again.
• For optimal sound performance, it is recommended to
use the supplied speakers.
• Do not connect more than one speaker to any one pair of
+/– speaker terminals.
2 Connect your iPod.
09/10/01 15:25 09/10/01 15:25