LG 32LV3710-TB Owner's Manual page 152

152
EXTERNAL CONTROL DEVICE SETUP
25. 3D (Command: x t) (Only 3D models)
► To change 3D mode for TV.
Transmission [x][t][ ][Set ID][ ][Data1][ ][Data2][ ]
[Data3][ ][Data4][Cr]
Data01 00 : 3D On
01 : 3D Off
02 : 3D to 2D
03 : 2D to 3D
Data02 00 : Top and Bottom
01 : Side by Side
02 : Check Board
03 : Frame Sequential
Data03 00 : Right to Left
01 : Left to Right
Data04 3D Effect(3D Depth) : 0~20
*If data01 is 00(3D On), data04 has no meaning.
*If data01 is 01(3D off) or 02(3D to 2D), data02, data03
and data04 have no meaning.
*If data01 is 03(2D to 3D), data02 and data03 have no
meaning.
Data 01 Data 02
00 O
01 X
02 X
03 X
X : don't care
Ack : All data must be consist of 2 characters.
[t][ ][OK] [Data1][ ][Data2][ ][Data3][ ][Data4] [x]
[t][ ][NG] [Data1] [x]
Data 03 Data 04
O X
X X
X X
X O
26. Extended 3D(Command: x v) (Only 3D models)
► To change 3D mode for TV.
Transmission [x][v][ ][Set ID][ ][Data1][ ][Data2] [Cr]
Data01 : 3D option item that user wants to adjust
Data
00 Picture Correction(Picture Type)
01 Effect(Depth) (Only 2D to 3D)
02 Viewpoint
03 Picture Size (Only Plasma TV)
04 Picture Balance (Only Plasma TV)
05 Optimization (Only active type)
Data02 : It has own range for each 3D option deter-
mined by Data01.
1) When Data 01 is 00(Picture Correction)
Data Picture Correction
00 Right to Left
01 Left to Right
2) When Data 01 is 01(Effect)
Data Min: 00 ~ Max: 14
(* transmit by Hexadecimal code)
3) When Data 01 is 02(Viewpoint)
Data Min: 00 ~ Max: 14
(* transmit by Hexadecimal code)
Data value range(0 to 20) converts Viewpoint range
(-10 to 10) automatically.
4) When Data01 is 03(Picture Size)
Data Picture Size
00
01
5) When Data01 is 04(Picture Balance)
Data Picture Size
00
01
6) When Data01 is 05(Optimization)
Data Min: 00 ~ Max: 02
(* transmit by Hexadecimal code)
Ack : All data must be consist of 2 characters.
[v][ ][OK] [Data1][ ][Data2] [x]
[v][ ][NG] [Data1] [x]
3D Option
Just Scan
16:9
Off
On