Advertisement
Quick Links
USER MANUAL ROUTER 4 in 1 - ΩMEGA O31 - WIRELESS N ROUTER 150M.
Thank you for purchasing a wireless router brand ΩMEGA. We have made every effort to ensure that the
device meets your expectations. If you have any questions relating to its operation, please visit
www.omega-technology.eu, where in the support section you will find additional materials about this
device.
The configuration procedure consists of hardware installation and software configuration.
Hardware Installation
According to the description on the packaging unit, connect the cables in the following order:
a) plug RJ45 network cable internet signal to the WAN port of the router
b) if the router is connected by wire to a computer: plug the network cable to the port RJ45 LAN / WAN
port of the computer and the router's LAN
c) Connect the power cord to the supplied AC adapter and power supply connected to the mains (230V).
d) if the router is connected wirelessly to a computer - no need to connect additional cables.
Starting the router, takes about a minute, after which the LEDs should indicate operation and you can
proceed to the software configuration.
Software Configuration
1. Configuration of the example of a computer operating system Microsoft Windows 7.
1.1 Click
"
S tart
：
【
】
—
C hange adapter settings
【
click"Local Area Connection"
1.2 Select
I nternet Protocol Version 4(TCP/IPv4)
【
—
C ontrol Panel
—
Network and Internet
【
】
【
—
L ocal Area Connection
】
【
s elect
P roperties
，
【
—
】
"
select the connected network card
】
，
】
c lick
P roperties
】 ，
【
N etwork and Sharing Center
【
Then right
，
】
】
Advertisement
Related Manuals for Omega OWLR151U
Summary of Contents for Omega OWLR151U
- Page 1 Thank you for purchasing a wireless router brand ΩMEGA. We have made every effort to ensure that the device meets your expectations. If you have any questions relating to its operation, please visit www.omega-technology.eu, where in the support section you will find additional materials about this device.
- Page 2 1.3 Select O btain an IP address automatically O btain DNS Server address automatically click 【 】 ， 【 】 ， 【 】 ， Return back to the previous interface and click 【 】 。...
- Page 3 、 、 、 、 R outer setting 2.1 Open the browser i nput and connect h ttp://192.168.1.1 ,Click “GO”. ， ： 2.2 Input the username and password on the login screen(the default username and the password are admin) 。 Click“OK” 2.3 Router Management screen will appear(Router defauit routing mode) 2.4 Set your router network name(SSID)and password (key value).
- Page 4 Method 3: PPPoE connection If you use the PPPoE(ADSL) connection, the PPPoE settings page will appear Please enter the user name and the password provided by your ISP Choose your correct WAN connection, then click “save/apply”. 3. Wireless connection ( for example with Windows Windows 7) ：...
- Page 5 3.4 Connection is successful – connected sign will appear 。 4.FAQs 4.1 How to reset to default settings of the router? Keep pressing the Reset button near to the wan port while the device is on, releasing it after 5~10 seconds will restore the router’s default settings. 4.2 Laptop can’t find the wifi signal? a.