Summary of Contents for Boser BPC-3600
- Page 1 BPC-3600 6.4” Industrial Panel PC with MainBoard, CF, TV-Out, Touch Screen, Power Adapter...
- Page 2 Unauthorized reproduction, transmission, translation, and storage of any form and means (i.e., electronic, mechanical, photocopying, recording) of this document, in whole or partly, is prohibited, unless granted permission by BOSER Technology Co., Ltd. reserves the right to change or improve the contents of BOSER Technology Co., Ltd.
-
Page 3: Table Of Contents
Table of Contents Chapter 1 General Description ........1 1.1 Major Features ............... 2 1.2 Specifications ................ 2 1.3 Panel Specifications ............. 3 1.4 Dimensions ................3 Chapter 2 Unpacking ..........5 2.1 Opening the Delivery Package..........5 2.2 Inspection................5 Chapter 3 Hardware Installation ......7 3.1 Remove Hard Disk Drive............ - Page 4 Declaration of Conformity -- CE Mark BOSER Technology hereby acknowledges that compliance testing in accordance with applicable standards of the EU’s EMC Directive, 89/336/EEC, was successfully completed on a sample of the equipment identified below: Equipment Class: Information Technology Equipment...
- Page 5 Safety Instructions The safety recommendations outlined in this section are to be read, understood and followed before operating the product. Keep this information in a safe place for future reference. Failure to comply with any of the following safety procedures could result in serious hazard. Do not operate product for any purposes other than its intended use This product is intended for indoor use only Do not operate product if power cord is damaged in anyway...
- Page 6 Life Expectancy of Constituent Parts This section describes the life expectancy of constituent parts (backlight, power supply, internal cooling fan and touch screen) which make up to BPC-3600 series. TFT Display Backlight Display brightness decreases over time with use. The expected operating lifetime of the backlight time to reach 50% initial brightness) is 30,000 hours (assuming continuous lit state at 25 degrees C).
-
Page 7: Chapter 1 General Description
Chapter 1 General Description The BPC-3600 series is an industrial Panel PC. The rear design of BPC-3600 series enhanced the disassembly process when required. It also supports various mounting solution like wall-mount, panel-mount, or desktop for different application. The BPC-3600 series has a 6.4” display and an optional touch screen that operate under all types of working environment. -
Page 8: Major Features
Major Features The BPC-3600 series comes with the following features: BPC-3600-C Aluminum front panel 6.4” high brightness TFT color panel display Built-in touch screen, mainboard, VIA Eden 500/667MHz CPU, +5V/+12V power adapter Onboard graphics, Ethernet, audio controller CF, TV-Out, DOC, COM, USB port 2.5”... -
Page 9: Panel Specifications
Panel Specifications Screen Size: 6.4 inches Display Format: R x 640, G, B x 480 Pixel Pitch: 0.2025(H) x 0.2025(V) m/m Brightness: 400 cd/m Contrast Ratio: 400:1 MTBF: 15,000 hrs. Dimensions... - Page 10 This page intentionally left blank.
-
Page 11: Chapter 2 Unpacking
Chapter 2 Unpacking Opening the Delivery Package The BPC-3600 series is packed in an anti-static bag. The board has components that are easily damaged by static electricity. Do not remove the anti-static wrapping until proper precautions have been taken. Safety instructions in front of this manual describe anti-static precautions and procedures. - Page 12 This page intentionally left blank.
-
Page 13: Chapter 3 Hardware Installation
Chapter 3 Hardware Installation This chapter tells how to install components into the Panel PC system. External interface please refers to system board’s manual. Remove Hard Disk Drive Please loose screws and detach the HDD module from main chassis. Remove the HDD form rear cover. -
Page 14: Install Hard Disk Drive
Install Hard Disk Drive Please attach the HDD to rear cover and fasten screws. Install the HDD module onto main chassis. -
Page 15: Chapter 4 Touch Screen Driver Installation
Chapter 4 Touch Screen Driver Installation This chapter contains the detailed information of touch screen driver installation procedures. The utility disk that came with the delivery package contains an auto-run program that invokes the installation programs for the touch screen driver. The following sections describe the installation procedures of driver based on WIN2000 operating systems. - Page 16 The next screen is “Software License Agreement”, select “I accept” and click on Next>. The next screen is Ready to Install the Program, click on Install.
-
Page 17: Installing Touch Screen Driver In Win2000
Once the Install Shield Wizard finishes updating your system, it will prompt you to restart the computer. Click on Finish to exit the wizard. 4.1.2 Installing Touch Screen Driver in WIN2000 Insert Utility CD Disk to your CD-ROM drive. The main menu will pop up as shown below. - Page 18 The next screen is Software License Agreement, select I accept and click on Next>. The next screen is Ready to Install the Program, click on Install.
- Page 19 Once the Install Shield Wizard finishes updating your system, it will prompt you to restart the computer. Click on Finish to exit the wizard.
-
Page 20: Driver Functions
Driver Functions 4.2.1 PenMount Control Panel Calibrate To adjust the display with touch screen, click on Calibration and follow the calibrate point to do calibration, there are five points on screen for calibration. Draw Test or demonstrate PenMount touch screen operation, also the touch location is shown on the display, touch DRAW to start. -
Page 21: Penmount Monitor
About It shows information about PenMount controller and this driver. 4.2.2 PenMount Monitor The PenMount monitor icon is shown in the menu bar of WIN2000 system when turn on PenMount monitor from PenMount Utilities. There are several functions on PenMount monitor: Right Click Button When select this function, there is a mouse icon shown in the right-button place of screen. - Page 22 This page intentionally left blank.
Need help?
Do you have a question about the BPC-3600 and is the answer not in the manual?
Questions and answers