Table of Contents
Advertisement
INSTALLATION
1.
CONNECT INPUTS Plug HDMI cables into inputs. Note input and output cables are not
included with this product.
2.
CONNECT OUTPUTS
3.
TURN MAIN SOURCE DEVICE ON Keep other source devices off at this stage.
4.
TURN SWITCHER ON Plug in to mains power and turn on.
5.
TURN DISPLAY DEVICE ON
MODE
The mode button allows the installer to set priorities. When the device is turned on, or when the
connection is lost:
1/ Resumes last input
2/ Goes to input 1
3/ Goes to last input plugged in
TC2-HDMI41_manual_en_v2.doc
5
Advertisement
Table of Contents
