Advertisement
Available languages
Available languages
Quick Guide
Teichweg 4 + 6
Tel. +49 (0) 5 41 - 7 70 95 - 0
www.focon - showtechnic. com
49504 Lotte / Wersen
Fax. +49 (0) 5 41 - 7 70 95 - 22
info@focon - showtechnic. com
Operating Modes
Changing operating mode
Press the Enter key
. The number of the current operating mode is displayed. You
can now select a different operating mode using the arrow keys
key a second time. Now you can set the DMX Start Address. Press the Enter key a third
time to exit and the operating mode selected will be activated. If when switching on
the
-button pressed the standard values gropes is loaded.
Mode description: ELP 80 LED Powerstick
Mode 1
DMX: 80 channel - linear, every LED is controlled individually
Mode 2
DMX: 8 channel - linear, in each case 10 LEDs per DMX channel
Mode 3
DMX: 4 channel - linear, in each case 20 LEDs per DMX channel
Mode 4
DMX: 80 channel - not linear
Mode 5
DMX: 8 channel - not linear
Mode 6
DMX: 4 channel - not linear
Mode 7
DMX: 80 channel - user
Mode 8
DMX: 8 channel - user
Mode 9
DMX: 4 channel - user
Mode 11 DMX: 160 channel - directly, in each case 2 DMX of channels per LED,
10Bit MSB first
Mode 12 DMX: 16 channel - directly, in each case 2 DMX of 10 channels per LED,
10Bit MSB first
Mode 13 DMX: 8 channel - directly, in each case 2 DMX of channels per colour,
10Bit MSB first
Mode 14 DMX: 60 channel - linear, RGB mode without white
Mode 15 DMX: 3 channel - linear, RGB mode without white
Mode 20 Program: Frequency dividers adjust
Mode 22 Program: Test output, slow colour fade
DMX value - linear allocation
DMX value - not linear allocation
Note: an extra tool ( ELP PDA ) will be available in middle of 2007. This tool will
provide direkt control of on board menufunctions ( Colour -, DMX - Channel - and
Frequencysettings i.e. for TV - Use ) via DMX
An illuminated decimal point indicates the operating state of the ELP 80 LED Power-
stick. Two decimal points blinking alternately in DMX mode indicate the presence of
a valid DMX signal.
. Press the Enter
Technical Specifications: ELP 80 LED Powerstick
Physical:
Length:
1000mm
Width:
Height:
Weight:
ca. 4,70kg
Chassis:
Anodized aluminium
Cover:
Acrylic glass
Photometric:
Colour:
Numbre:
Red
Green
Blue
White
Total
Automatic LED output reduction:
Optics:
Colours:
Control:
Connections:
Attention:
Only use M10 bolt with a max. thread lenght of 30mm for backside mount.
Electrical:
Input range:
85 -264VAC
85mm
Frequency range:
47 - 63Hz
83mm
Starting current
at 25°C ( <2ms ):
120VAC – 15A / 30A
230VAC – 30 / 60A
Current consumption:
75VA / 150VA
Temperature range:
Operating:
-10°C up to +35°C
Stored:
-20°C up to +75°C
Light output:
Dominant wavelength:
20 items
880lm
627nm
20 items
600lm
530nm
20 items
200lm
470nm
20 items
-
6000K
80 items
chassis temperature 50°: 20%
chassis temperature 60°: 50%
choice of 12°,30°,50° or 50° x 12°
10Bit per colour, additive RGB colour mixing
USITT DMX512 / 1990 ( 4µs )
DMX In 5pin XLR integrated plug
DMX Out 5pin XLR integrated socket
Advertisement
