Table of Contents
Advertisement
Quick Links
CORD
RECEPTACLE
For best results read the entire manual before operating.
Packing List
● TK-955 Soldering Station
● Soldering Iron with Tip
● Pencil Tip
Precautions
CAUTION: When the power is on, the tip temperature is between 200°C / 400°F and 480° C / 899°F. Since
mishandling may lead to burns or fi re, be sure to comply with the following precautions:
•
Do not touch the metallic parts while operating.
•
Always store the iron in the holder when not in use.
•
Do not use the product near fl ammable items.
•
Advise other people in the work area that the unit can reach a very high temperature and should be considered
potentially dangerous.
•
Turn the power off while taking breaks and when you are fi nished using it.
•
Before replacing parts or storing the unit, turn the power off and allow the unit to cool to room temperature.
To prevent damage to the unit and ensure a safe working environment, be sure to comply with the following precautions:
•
Do not use the unit for applications other than soldering.
•
Do not hit the soldering iron against the work bench or other objects to shake off residual solder.
•
Do not modify the unit.
•
Use only genuine replacement parts.
•
Do not bend or damage the security key. Should the key become bent, do not force it into the station.
•
Do not allow the unit to become wet or use the unit when your hands are wet.
•
The soldering process will produce smoke. Make sure the area is well ventilated.
DIGITAL DISPLAY
CALIBRATION ADJUSTMENT
● Iron Holder with Sponge
● 2 Security Keys
™
Soldering Station
RETAINING NUT
TEMPERATURE CONTROLS
CHISEL TIP
PENCIL TIP
TK955 Digital
IRON HOLDER
TIP RETAINER
TIP RETAINER NUT
CLEANING SPONGE
Advertisement
Table of Contents
Summary of Contents for TrakPower TK955
- Page 1 TK955 Digital ™ Soldering Station DIGITAL DISPLAY IRON HOLDER RETAINING NUT TEMPERATURE CONTROLS CLEANING SPONGE CHISEL TIP SECURITY KEY TIP RETAINER CORD TIP RETAINER NUT RECEPTACLE CALIBRATION ADJUSTMENT PENCIL TIP For best results read the entire manual before operating. Packing List ●...
- Page 2 Setup and Operation 1. Connect the soldering iron cord assembly to the receptacle. Secure it by rotating the retaining clip clock-wise. 2. Install the desired tip. 3. Saturate the cleaning sponge with water and place it into the holder. 4. Plug the power cord into a grounded outlet. 5.
- Page 3 5. To change temperature units: Use the “UP” and “DOWN” buttons to change between 1C (for Celsius) or 1F (for Fahrenheit). NOTE: Heater Error Temperature Tolerance: If power is being sent to the 6. When desired unit is displayed, press soldering iron and the tip temperature falls below the heater error temperature the “...
- Page 4 TrakPower Cleaning Wire with Holder TrakPower warrants this product to be free from defects in materials and workmanship for a period of 5 years on the base unit and 1 year on the iron handle from the date of purchase. During that period, TrakPower will, at its option, repair or replace without service charge any product deemed defective due to those causes.
Need help?
Do you have a question about the TK955 and is the answer not in the manual?
Questions and answers