Do you have a question about the SR-X and is the answer not in the manual?
Questions and answers
Summary of Contents for Ada SR-X
Page 1
SR-X Sirius Commercial Tuner User Manual 602-610 Mamaroneck Avenue, White Plains, NY 10605 1-800-HD-AUDIO Fax: (914) 946-9620 www.ada-usa.com Released 1/2008...
Page 2
Street: _______________________________ Apt. No. _______________ City: _________________________ State: _________ZIP: ___________ Email Address: __________________Purchase Date: _______________ Distributor/Dealer where you purchased your SR-X: ____________________________________________________________ Please briefly describe where you learned about this product: Please let us know if you are satisfied with you are unit:...
Page 3
Audio Design Associates, Inc. SR-X Tuner Audio Design Associates, Inc. SR-X Tuner This Warranty is in lieu of all other express warranties or liabilities. ANY Audio Design Associates, Inc IMPLIED WARRANTIES, INCLUDING AN IMPLIED WARRANTY 602-610 Mamaroneck Avenue OF MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION White Plains, NY 10605 OF THIS WRITTEN WARRANTY.
Audio Design Associates, Inc. SR-X Tuner Audio Design Associates, Inc. SR-X Tuner IMPORTANT SAFETY INSTRUCTIONS Technical Assistance Read Instructions – Read all Safety Instructions before operating For service inquiries or activation/deactivation information, contact Sirius equipment. on the Web at www.sirius.com or by phone at 1.888.539.SIRIUS Retain Instructions –...
Page 5
Audio Design Associates, Inc. SR-X Tuner Audio Design Associates, Inc. SR-X Tuner Servicing – Do not attempt to service this product yourself; there are Technical Specifications no customer serviceable parts inside. Refer all servicing to qualified service personnel. Power 12 V DC @ 1000 mA Damage Requiring Service –...
You will either be prompted for a pass-code or the Tuner ACTIVATING THE SR-X ..........11 Screen will be displayed. TOP LEVEL SCREENS..........12 Resetting Pass code from the SR-X front panel Startup Screen..................12 Follow the following sequence to reset the pass code: Main Screen....................12 Main Screen - Short Channel Name ..........12...
Page 7
New Pass Code Screen ................22 │ │ └────────────────────┘ Signal Screens ..................23 Install Screen ................... 23 If the Antenna is disconnected or cannot be detected, the SR-X will display this message. Sirius Communications Screen .............. 26 ┌────────────────────┐ Clock Setup Screens ................26 │ACQUIRING SIGNAL │...
Positioning the satellite antenna ┌────────────────────┐ Activating the SR-X Tuner │<[VERSION] │ │ EXIT >│ Before installing your SR-X, make sure you have all the parts listed below: └────────────────────┘ SR-X Tuner ┌────────────────────┐ Antenna (not included with the SR-X) │TUNER 1.2.1 [BACK]│...
Page 9
Press the knob and turn it to the DST (Daylight Saving Time). ┌────────────────────┐ Step 3. Antenna – connect the Sirius antenna (not included) to the ANT IN connector on the back of the SR-X Tuner and position as described in the │ GMT-5:00 Eastern │...
│SIRIUS CONNECT[BACK]│ │MODULE ID 001 │ └────────────────────┘ Pressing the knob on the BACK field will re-engage the ADA SR-X Canada processor to control the Sirius Module. The might reset itself as it switches back to the normal operating mode. Clock Setup Screens ┌────────────────────┐...
Page 11
Audio Design Associates, Inc. SR-X Tuner Audio Design Associates, Inc. SR-X Tuner Step 2: Determine the General Direction in Which You Need to Aim the Antenna The field beneath the COFDM label is the COFDM SNR/RNP value. The SNR is reported as “raw noise power” (RNP).
0005565120 │ Bring up the signal strength menu by pressing and releasing the front knob on the SR-X Tuner. If a pass-code is required, enter pass-code and enter └────────────────────┘ the SR-X menu system. Navigate to the Signal menu. The signal indicators shows the strength of both the satellite (SAT) signal and the The SR-X will display the uncorrected BER.
The ADA SR-X can display the current signal strength ┌────────────────────┐ Startup Screen │<[SIGNAL] │ │ EXIT >│ Upon startup, the ADA SR-X Sirius Commercial Tuner will display: └────────────────────┘ ┌────────────────────┐ │ADA SR-X │ Press the knob on SIGNAL will display the current signal strength. │...
SR-X Tuner Audio Design Associates, Inc. SR-X Tuner If the tuner is off, the following screen is displayed New Pass Code Screen ┌────────────────────┐ The ADA SR-X menu system can be pass code protected. │ 1/18/07│ │ ▫THU 10:28A│ ┌────────────────────┐ └────────────────────┘...
ADA SR-X Menu Navigation The ADA SR-X can lock out channels, making them unavailable for The ADA SR-X Tuner has a simple navigation system controlled by a tuning. single knob. The knob is turned to navigate the cursor from field to field ┌────────────────────┐...
Page 16
Audio Design Associates, Inc. SR-X Tuner Audio Design Associates, Inc. SR-X Tuner Turning the knob will move the cursor to the next field. ┌────────────────────┐ ┌────────────────────┐ │ EVT [EDIT]DEL BACK │ │ Ch 30 CoffeHse[On ]│ │ 1 Ch 31 WDY 11:30A│...
Program Screen ┌────────────────────┐ ADA SR-X Menu System │[PROGRAM-EVENT]BACK │ The SR-X menu system can be pass code protected. If the pass code is set │ PGM Off EXIT >│ to ‘0000’, pressing the knob from any information screen will display the └────────────────────┘...
Program mode or dayparting is very similar to programming a VCR to Event 3: Channel 2, Volume -22, Daypart-ONE, Time 10:00A, Date record a television show. The ADA SR-X can be programmed for 99 12/24/2007. events. Each event can turn the tuner on to a particular channel and volume at a specific time, change the channel and volume, or turn the tuner This event will occur on December 24, 2007 at 10:00A.
Need help?
Do you have a question about the SR-X and is the answer not in the manual?
Questions and answers