Advertisement
Advertisement
Table of Contents
Related Manuals for AngelEye SA300-AE-UK
Summary of Contents for AngelEye SA300-AE-UK
- Page 1 Ionisation Smoke Alarm User Manual SA300-AE-UK www.angeleye.com...
- Page 2 Smoke alarm devices License No: KM597992 EN 14604:2005 DOP: 13/03 GN3561R1 SA300-AE-UK Ionisation Smoke Alarm A Sprue Brand Sprue Safety Products Ltd. Vanguard Centre, Coventry CV4 7EZ UK Technical Support: 0800 141 2561 / EIRE dial 1-800 523171 Email: technicalsupport@sprue.com...
-
Page 3: Table Of Contents
CONTENTS Features Battery Replacement Positioning Troubleshooting Installation Maintenance Alarm Test Disposal Alarm Pause Warranty Note: This user manual is also available in large text and other formats Please email: technicalsupport@sprue.com or call 0800 141 2561 for further information... -
Page 4: Features
• Easy Installation - fixings supplied POSITIONING BEDROOM HALL BEDROOM WARNING: Your AngelEye smoke alarm can be installed into a new build property LOUNGE DINING ROOM as additional protection to an existing smoke detection system only It cannot be... - Page 5 Use ground floor between the staircase and of the SA300-AE-UK smoke alarm in any rooms in which a fire might start and common areas may not provide sufficient...
-
Page 6: Installation
INSTALLATION Mobile Homes and Caravans This smoke alarm suitable use in mobile homes and caravans 1 Open the cover and handle unit with In caravans: care to avoid damage 1 The preferred position fitting 2 Locate keyhole slots the smoke alarm is horizontally on 3 Mark holes through alarm base Then the ceiling in the living area Avoid remove alarm Drill two 4 75 mm holes... -
Page 7: Alarm Pause
BATTERY Test the sounder, battery and circuitry by pressing and releasing the Test / REPLACEMENT silence button to confirm that the alarm is operating properly The alarm should Your alarm requires one 9 volt battery sound as soon as the Test button is to power the smoke detector portion of pressed, and the Alarm LED will illuminate the unit... -
Page 8: Troubleshooting
TROUBLESHOOTING Problem Solution • If testing immediately after first activating the alarm or replacing the battery, you should allow a few seconds for the alarm to settle before testing Your smoke alarm • Make sure you push the centre of the test button firmly does not sound during •... -
Page 9: Maintenance
RADIOACTIVE CONTENTS open case will invalidate The SA300-AE-UK utilises a tiny amount of radioactive your warranty material, 0 9 microcuries (33 kilobecquerels) of Americium 241, to detect smoke This material is Cleaning in the form of a sealed source and represents no... -
Page 10: Warranty
Sprue Safety Products Ltd, at its discretion, agrees to replace the unit free of charge The warranty on any replacement SA300-AE-UK alarm, will last for the remainder of the period of the original warranty in respect of the alarm originally purchased –...
Need help?
Do you have a question about the SA300-AE-UK and is the answer not in the manual?
Questions and answers