NEBO Slyde 6156 User Manual

LED FLASHLIGHT C O B LED WORKLIGHT
• •
250 220m 190 18m
2h 3h30m
Brightness Distance Run Time Brightness Distance Run Time
1m 1m
Water- Impact- Water- Impact-
Resistant Resistant Resistant Resistant
OPERATION
Button uses standard operation and Soft Touch Technology.
Standard Operation: Simply click through the functions (light will turn off in
between settings)
Soft Touch: Press button halfway with no click. This allows the user to cycle
through the settings quickly without the light turning off between settings.
• FLASHLIGHT
1. To activate flashlight, click button 1x
• WORK LIGHT
2. From the previous mode, click button 2x or Soft Touch 1x
• OFF
3. From the previous mode, click button 1x
LED CHIP TECHNOLOGY
A new innovation in LED technology, C O
•
more compactly clustered LED chips that are mounted directly
to the circuit board. These LED chips work together as one
lighting module. Because of the compact design, C
outperforms traditional lighting by up to 50 times the light output
per centimeter of light source.
POWERFUL MAGNET
Keep your hands free to do
whatever it is you're doing!
Caution: Magnets of any kind may be prone to demagnetize credit cards, hotel keys and other sensitive objects that contain a magnetic data strip.
POWERFUL
250 LUMEN
FLA SHLIGHT
SLIDE
to Reveal
190 LUMEN
C O B WORK LIGHT
• •
B features smaller,
•
O B
• •
MAGNETIC
BASE
Provides convenient
hands-free lighting
PERFORMANCE & RUN TIMES
Flashlight
• Output: 250 Lumens • Output: 190 Lumens
• Run Time: 2 Hours • Run Time: 3.5 Hours
• Distance: 220 Meters • Distance: 18 Meters
BATTERY INSTALLATION
1 To access the battery cap, unscrew
(counter-clockwise) the end cap where
the magnetic base is located.
2 To access the battery compartment, unscrew
(counter-clockwise) the knurled cap.
3 Remove old batteries and dispose of properly.
Insert new batteries as shown.
To insure correct polarity, please take note of
the battery direction indication, printed on the
body of the SLYDE™, near the base.
Reattach the knurled battery cap, followed
by the end cap by turning clockwise.
WHAT'S INCLUDED
1 SLYDE™ flashlight / work light
2 Four AAA alkaline batteries
3 User manual
Work Light
1
2
3