Nº32 Ref e rence Preampl i f i e r
Power Consumption:
Operating voltage:
Preamplifier Connectors:
Controller Connectors:
Input Overload:
When gain is set to +18dB:
When gain is set to +12dB:
When gain is set to +6dB:
When gain is set to +0dB:
Input Impedance:
Output Impedance:
Maximum Main Output:
THD + N:
Crosstalk:
Residual Noise:
Frequency Response:
Overall Dimensions:
Shipping Weight:
Specifications are subject to change without notice.
Mark Levinson
®
is a registered trademark of
Harman International Industries, Incorporated.
Not responsible for typographic errors.
Part # 072-17089
150W maximum
100V, 120V, 220V, 230V, or 240VAC @ 50 or 60Hz (preset)
(3) balanced stereo inputs (female XLR)
(5) unbalanced stereo inputs (RCA)
(2) balanced main stereo outputs (male XLR)
(2) unbalanced main stereo outputs (RCA)
(1) balanced record stereo output (male XLR)
(2) unbalanced record stereo outputs (RCA)
(1) earth-reference ground terminal
(2) DC power connectors
(1) IEC-standard AC mains receptacle
(1) IR input (1/8-inch/3.5mm mini-jack)
(1) trigger input (1/8-inch/3.5mm mini-jack)
(1) trigger output (1/8-inch/3.5mm mini-jack)
(3) Link communication ports (RJ-45)
(1) RS-232 port (RJ-11)
(2) control ports (RJ-45)
(1) earth-reference ground terminal
(2) DC power connectors
2V on XLR, 1V on RCA
4V on XLR, 2V on RCA
8V on XLR, 4V on RCA
16V on XLR, 8V on RCA
100k
<10 on balanced (XLR)
<20 on unbalanced (RCA)
16V on balanced (XLR)
8V on unbalanced (RCA)
<0.001% balanced
<120dB (any input to any output, input unterminated)
<140dB (any input to any output, input terminated)
<120dB (20Hz to 20kHz, input terminated) balanced
10Hz to 40kHz (±0.2dB)
Controller
Preamplifier
width: 19.5" (49.5cm)
width:
height: 3.03" (7.68cm)
height: 3.19" (8.09cm)
depth: 12.96" (32.91cm)
depth:
Controller
Preamplifier
60lbs. (27kg)
46lbs. (21kg)
19.5" (49.5cm)
11.39" (28.92cm)
3 O a k P a r k , B e d f o r d , M A 0 1 7 3 0 - 1 4 1 3 U S A
T e l : 7 8 1 - 2 8 0 - 0 3 0 0 | F a x : 7 8 1 - 2 8 0 - 0 4 9 0
w w w . m a r k l e v i n s o n . c o m