AVT AVC776 User Manual page 22

3.5.9.2 Press " ENTER " to confirm TIME DISPLAY setup.
3.5.9.3 Press" Up " or " Down " to choose TIME DISPLAY setup.
OFF, Y/M/D, M/D/Y, D/M/Y.
3.5.9.4 Press " MENU " to exit and confirm current operation.
3.5.9.5 Press " MENU " again to exit and close SYSTEM setup mode.
3.5.10 TIME setup:
This device allows user to set time on monitor.
3.5.10.1 Press " Up " or " Down " to choose date display
3.5.10.2 Press " ENTER " to confirm date display format.
3.5.10.3 Press " Up " or " Down " to choose the correct Date & Time, and press press
" Right " or " Left " to move digit location.
3.5.10.4 Press " MENU " to exit and confirm current operation.
3.5.10.5 Press " MENU " again to exit and close SYSTEM setup mode.
3.5.11 NEW PASSWORD : XXXX setup: (Default password : 0000)
This device allows user to set the new password.
3.5.11.1 Press " Up " or " Down " to choose NEW PASSWORD : XXXX setup.
3.5.11.2 Press " ENTER " to confirm NEW PASSWORD : XXXX setup.
3.5.11.3 Press " Up " or " Down " to choose number, and press" Right " or " Left " to
move digit location.
3.5.11.4 Press " MENU " to exit and confirm current operation.
3.5.11.5 Press " MENU " again to exit and close SYSTEM setup mode.
3.5.12 CLEAR HDD setup
This device allows user to have the HDD cleared.
3.5.12.1 Press " Up " or " Down " to choose CLEAR HDD setup.
3.5.12.2 Press " ENTER " to confirm CLEAR HDD setup.
3.5.12.3 Press " Up " or " Down " to choose CLEAR HDD setup YES or NO.
YES: Confirm to clear HDD, and screen will show followings.
ALL DATA IN HDD
WILL BE CLEARED
ARE YOU SURE?
(◄ : NO ► : YES )
22