EPV Peregrine Tension 235 User Manual

Rearpro series

Advertisement

Peregrine Tension / 235 /
Tab-tensioned Electric Motorized Projection Screen
Important Safety & Warning Precautions
Make sure to read this user's guide and follow all procedures below.
Caution: The Screen's Black Top Drop is already set to its maximum drop distance. There is NO extra top Black
Drop in the roller. Please be aware of this. Any attempts to increase the top black drop will void your warranty
with Elite Screens. Unapproved changes or modifications (except for cutting the power cord for hardwire
installations) to this unit are prohibited and will void your warranty. For more information, please contact our
Technical Support Department at (877) 511-1211 Ext. 604.
Please retain this user's guide for future reference.
 To avoid damaging the unit do not use with any unauthorized accessories not
recommended by the manufacturer.
Handle the unit carefully during transportation to avoid any damages.
To ensure safe and reliable operation, direct connection to a properly grounded power source is
advised.
The power outlet supplying power to the unit should be close to the unit and easily accessible.
Do not install the unit on uneven or inclined surfaces.
Do not place any heavy objects over the power cord.
Position the power cord properly to avoid creating a trip obstacle.
To avoid an electrical shock or fire due to a loose contact or short circuit, do not overload the
power cord.
The internal & external parts of this unit are not end user serviceable. Do not attempt to
disassemble this unit by yourself. Only authorized technicians can open and make repairs to this
unit.
Make sure the power source that this unit is connected to has a continuous power flow.
If there is need to use an extension cord, make sure the cord has an equal rating as the appliance
to avoid overheating.
Do not handle the power plug when your hands are wet or your feet are in contact with water.
Rev.072512-JA
RearPro Series:
User's Guide
1
www.elitescreens.com/epv

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Peregrine Tension 235 and is the answer not in the manual?

Questions and answers

Summary of Contents for EPV Peregrine Tension 235

  • Page 1 If there is need to use an extension cord, make sure the cord has an equal rating as the appliance to avoid overheating.  Do not handle the power plug when your hands are wet or your feet are in contact with water. Rev.072512-JA www.elitescreens.com/epv...
  • Page 2 Regardless of the mounting method, the screen should be securely supported so that vibrations or pulling on the viewing surface will not cause the casing to become loose or fall. The installer must insure all fasteners used are of adequate strength and suitable for the installation location. Rev.072512-JA www.elitescreens.com/epv...
  • Page 3 IR remote control even in a recessed button and plugs directly into the screen’s RJ-45 ceiling installation. The IR “Eye” Receiver is compatible with input. party IR controllers. IR “Eye” Receiver Rev.072512-JA www.elitescreens.com/epv...
  • Page 4 2 or 3 D. Extruded Hanging Bracket 2 or 3 120”& above models x 3 Installation Instructions 1. Insert each Bolt (B) through the right & left slide channel located on the top of the screen’s case. channel Rev.072512-JA www.elitescreens.com/epv...
  • Page 5 1. If the tension string is loose, pull and turn the tension knob clockwise to tighten the string. To release the tension, pull and turn the knob counter-clockwise. Tension Knob For a local Elite Screens contact or Technical Support, please visit www.elitescreens.com Rev.072512-JA www.elitescreens.com/epv...

Table of Contents