To Use The Tone List To Select A Tone; Using The Digital Piano's Pedals - Casio Celviano GP-300 User Manual

To use the tone list to select a tone

With this method, all of the Digital Piano's tones are
included in the list, including those not assigned to a
tone group button.
1.
On the home screen (page EN-8), use the w
and q arrow buttons to select the tone
name you want.
• The pointer ( ) indicates the name of the currently
selected tone. Pressing a keyboard key plays the
selected tone.
• The pointer ( ) does not stay in any particular tone
group.
• Holding down the q or w arrow button scrolls
through tone names at high speed.
• You can use the u and i arrow buttons to select a
tone group.
• To return to tone number 01 (Berlin Grand), press the
q and w arrow buttons at the same time.
2.
Press the ENTER button to apply the
currently selected tone.
• The currently selected tone will also be applied
automatically if you do not perform any button
operation for about ten seconds in step 1.
Using the Digital Piano's
Pedals
Your Digital Piano comes equipped with three pedals:
damper, soft, and sostenuto
Soft pedal
Sostenuto pedal
Pedal Functions
Damper Pedal
Pressing the damper pedal while playing will cause the
notes you play to reverberate.
• When grand piano is selected as the tone, using this
pedal generates harmonic and other resonance, just
like the damper pedal on an acoustic grand piano.
Half-pedal operation (pressing the pedal part way)
is also supported.
Soft Pedal
Pressing this pedal while playing suppresses notes
played on the keyboard after the pedal was pressed,
and makes them sound softer.
Sostenuto Pedal
Only the notes of the keys that are depressed when this
pedal is pressed are sustained, even if the keyboard
keys are released, until the pedal is released.
• If pressing the pedal does not produce the desired
effect, it could mean that the pedal cord is not
connected properly. Refer to step 2 under "To
connect the cables" (page EN-60).
Playing with Different Tones
Damper pedal
EN-11