Connect To The Wireless Network Using Windows Xp - D-Link DIR-457 User Manual

Section 5 - WEB Configuration
Connect to the Wireless Network Using Windows XP
®
Windows XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for
®
Service Pack 2 users. If you are using another company's utility or Windows 2000, please refer to the user manual
®
of your wireless adapter for help with connecting to a wireless network. Most utilities will have a "site survey" option
similar to the Windows XP utility as seen below.
®
If you receive the Wireless Networks Detected bubble, click
on the center of the bubble to access the utility.
or
Right-click on the wireless computer icon in your system tray
(lower-right corner next to the time). Select View Available
Wireless Networks.
The utility will display any available wireless networks in your
area. Click on a network (dlink_mypocket) and click the Connect
button.
If you get a good signal but cannot access the Internet, check you
TCP/IP settings for your wireless adapter. Refer to the Networking
Basics section in this manual for more information.
D-Link DIR-457/DIR-457U User Manual 89