Table of Contents
Advertisement
Choosing the Right Location
Carrying the appliance
The appliance must be carried by 2 or
more people.
Start by tilting the appliance backwards.
One person should stand behind it, holding
the rear of the top panel. The other person
should grip the bottom stands in the front.
Installation of bottom plate
The accessories for the bottom plate are in
the upper foam pad of the packaging, so
do not throw the foam pad away.
Upper foam pad
The bottom plate
must be installed
with the FRONT
mark facing
frontwards.
1 Tilt the appliance body backwards by
about 60° and keep it stable, and then
conduct installation from the front.
2 Hang the rear claw of the bottom plate
to the base first.
3 Snap the front claw into the base. (Until
a click is given)
4 Snap the left and right claws into the
base securely. (Until a click is given)
10 - Installation Instructions
NA-128VG5_New Zealand.indb 10
Bottom plate (position for bottom plate)
Installing the set-in appliance
- You need a space at least 60 cm wide.
At least 2 mm of clearance on the sides,
and 3 mm of clearance above and
behind the appliance are required.
- Remember to insert the mains plug into
an independent household dedicated
socket, and ensure that the socket is
at a place facilitating plug insertion and
removal.
The right place for the
appliance
Make sure that there is enough space for
the appliance.
182
582
596
Dimensions (unit: mm)
CAUTION
- Install the appliance on a flat and
firm floor surface to avoid excessive
vibration and noise.
- Do not install the appliance in direct
sunlight or in a place where freezing
may occur in winter.
- Do not let metallic portions of the
appliance come into contact with
metal plates, stainless steel plates of
a kitchen sink, or other appliances.
465
24
567
2015-2-6 20:30:33
Hide quick links:
Advertisement
Table of Contents
