Quick Start About the Camera Power Button Battery Status Record Button Rotating Lens Record Status Memory Status Resolution Switch Charge Indicator Battery Latch Battery Slot MicroSD card Manual_and Info_2009_1080.indd 1 25/9/2009 16:25:07...
Getting Ready Power Up • Open the back door. • Push power button. • Insert battery with (+) • Camera beeps and lights turn off. aligned and close latch. • You are ready to record. • Align back door slightly above camera and slide Note: Power up with record switch down until it locks in.
Page 5
Record • Start: Slide switch forward. • Stop: Slide switch back. • Congrats, your fi rst video! Share • Install Easy Edit Software directly from MicroSD card provided or download at: www. VholdR.com/support/software. • Connect camera to computer with USB cable. •...
Page 6
Video Use switch under back door to select video resolution. • Default Resolutions • Alternate Resolutions HI: 1920x 1080 at 30fps 1280 x 960 at 30 fps | 720 x 1280 at 30 fps LO: 1280x720 at 60 fps 848 x 480 at 60 fps •...
Status Press power button to check status. • Memory / Battery Available • Record Status Green > 80% Green = ready Yellow 20-80% Red = recording Red < 20% Flashing = memory full or corrupt • 2GB microSD card included. Accepts up to 16GB microSD. (SDHC compatible) Error Conditions •...
Flat Surface Mount • Unhook leash on base and loop through camera. • Slide camera onto rails until it clicks. • Adhere mount to fl at surface (top or side of helmet recommended). • Hold base, pull camera away, rotate to align, and press into mount to reattach.
Page 9
Goggle Mount • Slide camera on rails until it clicks. • Press thumb on large tab (top of mount) and pull camera away. • Slide goggle strap into base. • Align vertical angle of camera. • Snap rails back into mount over strap.
Page 10
Align • Press power button to activate lasers. • Aim at your hand, a wall, or other object. • Rotate lens to align lasers horizontally. • Remove and reorient mount rails to adjust mount angle. Aim a little high for the best shot. Manual_and Info_2009_1080.indd 8 25/9/2009 16:25:07...
Page 11
We are here to help Keeping Shoot and Share simple is what we are all about. We would love to help you have a great ContourHD1080p experience so please contact us with any questions you have. Hours: Monday – Friday (9am to 6pm PST) Toll Free: 866.397.6920 (USA)
180-day limited warranty for ContourHD1080p Camera. Read all safety information below and operating instructions before using ContourHD1080p Camera to avoid injury. For detailed operating instructions and the latest Important Product Information Guide, go to: www.vholdr.com/support. Important Safety Information WARNING: Failure to follow these safety instructions could result in fi...
Inc. and may present a risk of fi re or explosion. To charge, only use the ContourHD1080p USB Cable with a high-power USB port on a computer or other device that is compliant with the USB 2.0 or 1.1 standards, or the ContourHD1080p camera USB power adapter or battery charger.
FCC Information ContourHD1080p Wearable Camcorder Model: 1300 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation.
• Consult the dealer or an experienced radio/TV technician for help. The CE symbol on your ContourHD1080p camera indicates that it is in compliance with the Safety of ITE, Electromagnetic Compatibility (EMC) directive, Limits and Methods of Measurement of Radio Interference Characteristics of ITE and the Low Voltage Directive (LVD) of the European Union (EU) for Class B domestic environment.
Please use caution and do not stare directly into the beam. Repairing or modifying Never attempt to repair or modify ContourHD1080p Camera yourself. Disassembling ContourHD1080p Camera, including the removal of external screws, may cause damage that is not covered under the warranty. The ContourHD1080p Camera does not contain any user-replaceable parts, except the MicroSD card and battery.
Page 17
TWENTY20, INC. LIMITED WARRANTY Twenty20, Inc. (“Manufacturer”) warrants to the original end user (“Purchaser”) that for the 180 days (“Warranty Period”), the ContourHD1080p Wearable Camcorder (excluding any third party software) and accessories (“Product”) will be free from defects in materials and workmanship when properly installed and used for its intended purpose and in its intended operating environment.
Page 18
to Manufacturer for service), and assumes no liability for such loss. Purchaser assumes all liability, and as such releases Manufacturer from any liability, for any accident, injury, damage, death, loss, illegal activity or any other claim that may occur resulting from or during use of the Product, whether or not such use is foreseeable by Manufacturer.
Page 19
TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT WILL MANUFACTURER BE LIABLE FOR ANY LOST DATA, REVENUE OR PROFIT, OR FOR SPECIAL, INDIRECT, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, HOWEVER CAUSED REGARDLESS OF THE THEORY OF LIABILITY, ARISING OUT OF OR RELATED TO THE USE OF OR INABILITY TO USE THE PRODUCT, EVEN IF MANUFACTURER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
How to get service To obtain warranty service, register your product at www.vholdr.com within 180 days from the date you purchased this product. If service is required, you may be instructed to deliver the product freight prepaid, in either its original packaging or packaging affording an equal degree of protection, to the company and provide proof of purchase in the form of a bill of sale or receipt which evidences that the unit is within the warranty period.
Page 21
Twenty20 Disclaimer All purchasers, users, and any or all parties involved or engaging in the use of Twenty20, Inc (“Twenty20”) products agree to the following: • Twenty20 does not promote or endorse high risk, careless and/or dangerous actions when using its products. •...
Need help?
Do you have a question about the ContourHD1080p and is the answer not in the manual?
Questions and answers