iREZ K2 Quick Install Manual

K2
USB 2.0
3 Equipment Assembly and Set-up
1
2
3
4
5
7
6
Install the latest drivers from our website,
http://www.irez.com/
fig A
fig B
Basic Overview
1 focus ring
2 glass lens; 54º field of vision
3 LED power indicator
4 universal camera mount
5 patented removable claw*
6 lens cover
7 micro 3.6mm USB 2.0 cable
*US Patent #5,855,343
Minimum System Requirements
• Intel Pentium lll 500MHz processor or faster
• Microsoft Windows XP SP1 or 2000 SP3*
• 128MB RAM (256MB Recommended)
• CD-ROM Drive or Internet access
• One Available USB 2.0 Port
• 160MB Free Hard Disk Space
(260MB Recommended)
* If lower service packs are installed, your resolution will
be limited to 160 x 120.
Closing/Opening the K2
The K2 was designed to fold down for transport and
for protection for the lens. [See fig A]
K2 Mounting Options
The K2 was designed to hang from the top of your
laptop or flatscreen monitor or be attached to the
optional base and armature assembly. (See fig B)
Specifications
Image Sensor Size: 1/3"; 0.35 Megapixels
Resolution: Up to 640x480
Focus Distance: 5cm to ∞
Field of View: 54º
Colors: Up to 32 bits RGB
Frame Rate: Up to 30 fps at 640x480 (VGA)
USB Cable Length: 2 meters
Manual Focus
Auto White Balance
Auto Exposure Control
LED Indicator
90 Day Limited Warranty
K2
USB 2.0 Quick Install Guide
1 Contents
1. This Quick Install Guide
2. K2 USB 2.0 Video Camera
3. CD with Drivers and Application Software
Thank you for purchasing the K2 USB 2.0 Video Camera
2 Install drivers from the CD
Installation for Windows XP
1. Insert the included CD into your drive. A welcome screen should popup, if it
does not, you'll need to run setup.exe from your CD-drive. You can now follow
the on-screen instructions.
2. Once the installer is finished, remove the CD from your drive.
3. You can now plug your camera into a USB 2.0 port.
1 Contents