LC-40/46LE830E, RU/831E, S
12. Video signal adjustment procedure
The adjustment process mode menu is listed in Section 5.
Signal generator level adjustment check. (Adjustment to the specified level)
•
Composite signal PAL
•
33K component signal (50 Hz)
•
ANALOG PC (RGB) signal
12.1. Entering the adjustment process mode
Enter the adjustment process mode according to Section 4.
12.2. PAL signal adjustment
Adjustment point
1
Setting
2
Auto adjustment
performance
* ATTENTION: Please execute [12.3. TUNER adjustment] afterwards if you adjust [12.2. PAL signal adjustment] after all adjustments are
completed.
12.3. TUNER adjustment
Adjustment point
1
Setting
2
Auto adjustment
performance
12.4. SECAM adjustment
Adjustment point
1
Setting
2
Auto adjustment
performance
: 0.7Vp-p ± 0.02Vp-p (Pedestal to white level)
: 0.7Vp-p ± 0.02Vp-p (Pedestal to white level)
: Y level
: 0.7Vp-p ± 0.02Vp-p
: PB, PR level
: 0.7Vp-p ± 0.02Vp-p
: RGB level
Adjustment conditions
[Signal]
•
PAL
Full field colour bar
composite signal
[Terminal]
EXT1 SCART Video (PAL)
IN
Adjustment process
Bring the cursor on [PAL ADJ] and press [OK].
[PAL ADJ] page 4/24
[PAL ADJ OK] appears when finished.
Adjustment conditions
[Signal]
•
PAL sprit field colour Bar
•
RF signal UV
Signal level: 55 dB µV ± 1dB (75Ω LOAD)
[Terminal]
TUNER
Adjustment process
Bring the cursor on [TUNER ADJ] and press [OK].
[TUNER ADJ] page 3/24
[TUNER ADJ OK] appears when finished.
Adjustment conditions
[Signal]
•
SECAM
Full field colour Bar Signal
[Terminal]
EXT1 SCART IN
Adjustment process
Bring the cursor on [SECAM ADJ] and press [OK].
[SECAM ADJ] page 4/24
[SECAM ADJ OK] appears when finished.
Adjustment procedure
Feed the PAL full field colour bar signal (75% colour saturation) to EXT1
SCART IN.
[VIDEO input signal]
100% white
Adjustment procedure
Feed the PAL Split Field colour bar signal (E-12ch) to TUNER.
Make sure the PAL colour bar pattern has the sync level of 7:3 with the picture
level.
Adjustment procedure
Feed the SECAM full field colour bar signal (75% colour saturation) to EXT1
SCART IN.
[VIDEO input signal]
100% white
5 – 17
Black
[E-12CH]
100% white
Black