Table of Contents
Advertisement
Appendix
■
.
Mic/Receiver/Pressure-release.vent/Speaker
Do not poke Mic, Receiver, Pressure-release vent or Speaker with sharp-edged
objects.
Thoroughly wipe water drops from Mic, Receiver, Pressure-release vent or
Speaker to avoid malfunction.
Draining.Water.from.Handset
Even.small.amounts.of.water.can.seep.in.through.hinge,.affecting.
Receiver.or.Speaker.Volume.or.sound.quality..Drain.water.as.follows:
1. Wipe.water.off.handset.with.clean.dry.cloth.
2. Hold.handset.firmly..Shake.handset.about.20.times.until.no.water.
drops.come.out..Repeat.on.all.sides.
<Receiver/
Pressure-release vent>
3. Pat.handset.against.a.clean.dry.cloth.to.remove.remaining.water.from.
Mic,.Receiver,.Pressure-release.vent,.Speaker,.hinge,.etc.
. • Do not wipe gaps directly with a cotton
swab.
<Mic>
<Speaker>
4. Fully.drain.moisture.and.then.operate.handset.
Some water may remain on handset even after above steps are followed. Let
handset dry naturally before use. Keep handset away from anything that you do not
want to get wet.
Charging.Battery
Accessories.and.other.optional.items.are.not.waterproof.or.dustproof.
Observe.the.following.before/after.charging:
Never charge Battery when handset is wet. May cause electric shock or
malfunction/fire due to short circuit. Wipe water off handset with clean dry cloth
before charging Battery.
Secure External Device Port Cover after charging.
9-23
Advertisement
Table of Contents
