Scanning With The Dock; Scanning A Document With The Docking Station - GPX PS803 v827-01 User Manual

Scanning with the Dock

Scanning a Document with the Docking Station

The MagicScan software must be open and running in the desired mode to use the scanner while docking.
For information on specific scanning modes, see the following sections on Using the MagicScan Software.
1. Connect the Scanning Wand to the dock and lock it into place.
2. Connect the docking station to a PC using the included USB cable.
3. Open the MagicScan Software.
4. Select the desired mode and follow the instructions for that mode to scan your document (see following
section for details).
5. Make sure paper orientation matches the diagrams below, or the document will not scan correctly. The item
to be scanned should feed automatically after you place it in the dock.
Top of Document
SCANNING WHILE DOCKED REQUIRES USE OF THE MAGICSCAN SOFTWARE.
Customer Support: 1-888-999-4215
FEED ITEMS TO BE SCANNED
DOWNWARDS AND UPSIDE DOWN!
Top of Document
9