Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for XENO XPTZ22IR
Summary of Contents for XENO XPTZ22IR
- Page 1 XPTZ22IR Speed dome User Manual...
- Page 2 Before You Begin Read these instructions before installing or operating this product. Note: This installation should be made by a qualified service person and should conform to local codes. This manual provides installation and operation information. To use this document, you must have the following minimum qualifications: ...
- Page 3 This apparatus is manufactured to comply with the radio interference. A Declaration of Conformity in accordance with the following EU standards has been made. The manufacturer declares that the product supplied with this document is compliant the provisions of the EMC Directive 2004/108/EC, the CE Marking Directive 93/68 EEC and all associated amendments.
-
Page 4: Important Safeguards
IMPORTANT SAFEGUARDS 1. READ AND RETAIN INSTRUCTIONS Read the instruction manual before operating the equipment. Retain the manual for future reference. 2. CLEANING Turn the unit off and unplug from the power outlet before cleaning. Use a suitable cloth for cleaning. Do not use harsh cleansers or aerosol cleaners. 3. - Page 5 13. DAMAGE REQUIRING SERVICE Disconnect the equipment from the power source and refer servicing to qualified service personnel under the following conditions: A. When the power supply cord or the plug has been damaged. B. If liquid has spilled or objects have fallen into the unit. C.
-
Page 6: Table Of Contents
INDEX 1 Product Introduction........................1 1.1 Package Contents ........................1 1.2 Specification ..........................1 1.3 Function Description ........................2 2 Installation ............................4 2.1 Dimensions ..........................4 2.2 Installation ............................ 5 2.2.1 Wall Mounted ......................5 2.2.2 Ceiling / Soffit Mount ....................6 2.3.3 Alternative Mounting .................... -
Page 7: Product Introduction
1 Product Introduction 1.1 Package Contents XPTZ22IR Wall mount bracket Screw kit 2.1mm jack adaptor This user manual 1.2 Specification XPTZ22IR Image Sensor 1/3" Super HAD II SONY CCD, Effio E Horizontal Resolution 700TVL (960H) IR Illumination Distance S/N Ratio >55dB... -
Page 8: Function Description
1.3 Function Description Auto-adapt to Protocol The dome can auto-adapt to the Pelco D & Pelco P protocols Software ID Addressing Set the communication ID via the OSD Auto Flip In the manual scanning mode, when beyond the maximum angle in tilt and if the joystick is held continuing in tilt direction, the dome will automatically rotate 180 degree in horizontal direction to maintain continuity of scanning. - Page 9 Guard Tour (preset tour) Dome patrol scans according to certain edited preset order. Limited Points Scan (A-B Scan) The dome operates reciprocating scanning the real scenarios at a certain speed between the set left and right points. The range of left and right points boundary is 20° - 340°. Power Off Memory This feature allows the dome to resume its previous preset or status after power is restored.
-
Page 10: Installation
2 Installation 2.1 Dimensions Wall bracket Installation (Wall bracket included) Ceiling bracket Installation (XPTZ-ADP available separately) -
Page 11: Installation
2.2 Installation 2.2.1 Wall Mounted Installation conditions: Ensure the wall you are planning to mount the camera on can support the combined weight of the wall bracket and the camera and that the fixings you use are suitable for use in this application: a. -
Page 12: Ceiling / Soffit Mount
2.2.2 Ceiling / Soffit Mount TO CEILING / SOFFIT MOUNT YOU WILL REQUIRE THE FOLLOWING PART: XPTZ-ADP (available separately – speak to your Norbain Account Manager) Installation conditions: Once you have the XPTZ-ADP, you can now ceiling or soffit mount the camera, ensure the ceiling or soffit you are planning to mount the camera on can support the combined weight of the XPZT-ADP and the camera and that the fixings you use are suitable for use in this application:... -
Page 13: Alternative Mounting
b. As shown in fig 2.4, fix the Base of ceiling (base plate) to the ceiling or soffit with the fixings provided (if these are suitable for the application – if not, you will need to source your own). Fig 2.4 Note: If the dome is being mounted externally, use a silica gel / sealant on the Base of ceiling (base plate) and around the out-holes to seal from moisture ingress c. -
Page 14: Connection
2.3 Connection Connection of RS485 Before connecting, please turn off the power and read carefully the instructions of all connected devices. RS485: Yellow (RS485A): + / Orange (RS485B): - 3. Function Instruction 3.1 Screen Character Operation Call preset 95 to enter the OSD, call preset 94 to exit the OSD. ... -
Page 15: Special Function
Preset point setting: Setting a preset, press button “preset”+”number”+”enter”, e.g. on a Vista VKBD4: THEN “PRESET NUMBER” THEN Calling a preset, press button “call”+”number”+”enter”, e.g. on a Vista VKBD4: “PRESET NUMBER” THEN Deleting preset press button “clear”+”number”+”enter”. Remark: Please note that some presets are reserved for special functions and cannot be overwritten. -
Page 16: Osd Menu
4 OSD Menu 4.1 OSD Main Menu <MAIN MENU> <SYSTEM> <DOME> <CAMERA> <LANGUAGE> <DISPLAY> <RESET> EXIT Fig 4.1.1 Main menu display <SYSTEM> PROTOCOL AUTO COMM 2400.N.8.1 DOME ID VERSION TEMPERATURE EXIT Fig 4.1.2 Selecting SYSTEM provides the following dome information (Fig 4.1.2) PROTOCOL: Display the protocol of the dome COMM: Baud rate. -
Page 17: Dome
SAVE EXIT The XPTZ22IR is addressed via the software and is defaulted to Target ID 1 (Address). To be able to change any of the dome comm settings, you need to use the control method to match the CHECK ID code with the DEVICE ID code, using the left / right commands to move the cursor and up / down to change the number. -
Page 18: Ir Display
As the XPTZ22IR is defaulted to TARGET ID 1 (addressed), if you are using more than 1 XPTZ22IR on the DVR, it is recommended that you connect the XPTZ22IR to CH1 on your recording device to programme it and work in reverse order from the highest number to the lowest e.g. -
Page 19: Guard Tour
4.2.3 Guard tour This dome camera can set 3 guard tours. Each group has 16 points (presets) and each point can be individually programmed for dwell time and tour speed. <GUARD TOURS> <GUARD TOUR> GUARD TOUR ID POINT TIME SPEED <SETTING>... -
Page 20: Pan Scan
<A-B SCAN> PRESET A: This can set to preset point 1 to 64 PRESET A PRESET B: This can set to preset point 1 to 64 PRESET B SCAN SPEED: 1 to 64 (1 = slowest / 64 = fastest). SCAN SPEED DWELL TIME: 2 to 60s, the time the preset point waits before moving to the other point. -
Page 21: Camera
<PARK ACTION> <PARK ACTION> PARK MODE PARK TIME <SETTING> PRESET 1: SAVE RUNNING PRESET 2: BACK DELETE EXIT Fig 4.1.3 PARK MODE: Select between – Off / Park action / A-B scan / Pan scan / Guard tour 01 / Guard tour 02 / Guard tour 03 / Action. -
Page 22: Language
<CAMERA> CAMERA: Do not change from auto as functionality may be lost CAMERA AUTO ZOOM SPEED: Select between fast and slow ZOOM SPEED FAST DIGITAL ZOOM: Not supported on this model DIGITAL ZOOM FOCUS: Select between Auto & Manual FOCUS AUTO IRIS: Select between Auto &... -
Page 23: Appendix I Common Knowledge On Rs-485 Bus
<RESET> DOME RESTART: Confirming this does a power <DOME RESTART> recycle <SYS DATA> SYS DATA: Confirming this defaults the system <CAM DATA> settings. <PRESET> CAM DATA: Confirming this defaults the camera settings EXIT PRESET: Select between: All, 1 to 16, 17 to 32, 33 to 48, 49 to 64 to delete these presets. - Page 24 XPTZ22IR_Manual V1_1_APRIL_15...