1-1. MECHANISM MOTOR DIRECT DRIVE MODE
• Functional Overview
A mechanism has three motors (M400, M401 and M402), and
if a motor does not run, each motor can be driven during the
time that the button is pressed.
• Setting Method
While pressing DISC SKIP button and 6 OPEN/CLOSE 3
button, insert the AC plug cord into the AC outlet. (Disc LEDs
are all blinking in green and orange.)
• Button Input and Operation in Mechanism Motor Direct
Drive Mode
Table 1-1.
BUTTON
OPERATION
) +
Carrier UP
= 0
Carrier DOWN
^
Tray IN
p
Tray OUT
6 OPEN/
Gear
CLOSE 1
6 OPEN/
Chucking
CLOSE 2
• Releasing Method
Turn off the power switch, and this mode is reset.
1-2. AGING MODE
For the AGING MODE, refer to the CMT-M11C service manual
(Parts No.: 9-960-794-11).
SECTION 1
SERVICING NOTES
MOTOR
M400
M402
M401
– 3 –