Attaching The Toroidal Ferrite Core To The Cord Of The Subwoofer - Samsung MX-HS6000 User Manual

Attaching the Toroidal Ferrite Core to the Cord of the Subwoofer

Attaching the Toroidal ferrite core to the cord of the subwoofer helps prevent RF
interference from radio signals.
1. Pull the fixing tab of the Toroidal ferrite core to open it.
2. Make one loops around the core with the cable of the subwoofer.
3. Attach the Toroidal ferrite core to the Subwoofer cord as the
figure shows, and then press it until it clicks.
LOOPING THE CABLE AROUND THE TOROIDAL CORE
Lift up to release the lock and open the core.
Close the lock.
Make one loops around the core with the cable.
(Start winding 2 to 4 inches [5-10 cm]
away from the core).
11
English
(MX-HS7000)
(MX-HS6000)