Subscribe to Our Youtube Channel
Summary of Contents for Festool CLEANTEX CT 48 E LE EC
- Page 1 FESTOOL GmbH Wertstraße 20 D-73240 Wendlingen Tel.: 07024/804-0 Telefax: 07024/804-20608 E-Mail: info@tts-festool.com Instruction manual Important: Read all instruc- tions before using CLEANTEX CT 48 E LE EC/B22...
- Page 2 1-10 1-11 1-12 1-13 1-15 1-14...
- Page 3 SC-FIS CT 48 497 542...
- Page 4 HEPA-HF-CT48 496 171...
- Page 5 479 709 KLF-CT...
-
Page 6: Table Of Contents
Original operating manual Symbols Symbols..........Intended use......... Warning of general danger Machine features ......... Technical data ........Risk of electric shock Safety instructions ....... Read the Operating Instructions/Notes! General safety instructions....Operation..........Wear a dust mask. Initial operation ........Switch on/off ........Do not extract glowing dust or other Settings .......... -
Page 7: Machine Features
Machine features [1-9] Switch [1-1] Sealing plug [1-10] Suction power adjuster [1-2] Intake opening [1-11] Appliance socket with automatic on/off [1-3] Compressed air connection function [1-4] Connection for energy box [1-12] Locking clip [1-5] Handle [1-13] Dust container [1-6] SysDoc [1-15] Brake [1-7] Handle SB-CT (accessory) -
Page 8: Operation
Risk of accident The mains voltage and the frequency of the pow- er source must correspond with the specifica- tions on the machine's name plate. In North America, only Festool machines with the voltage specifications 120 V/60 Hz may be used. -
Page 9: Initial Operation
Initial operation The switch [1-9] serves as an on/off switch. Switch position "0" Open the locking clips [2-2] and remove the top section of the machine [2-1]. Appliance socket [1-11] is disconnected from the power, mobile dust extractor is switched off. Remove the accessories from the dust container [2-3] and the packaging! "MAN"... -
Page 10: Connecting The Energy Box
An IAS adapter (454757) is available to con- latches into place. Push the green lever [1-14] again nect Festool air tools to the IAS system. to release. The operating pressure of the tool must be 6 bar for Temperature cut-out the automatic switch-on unit to function correctly. -
Page 11: Working
Working Handling Extracting fluids L The HEPA filter element shall only be used for ex- SysDoc SYSTAINER attachment system: A SYS- TAINER can be attached to the storage area using tracting dry materials. the four locking latches [6-1]. Before extracting fluids, remove the filter bag (see Chapter "Changing the filter bag (SC-FIS-CT 48)"). -
Page 12: Service And Maintenance
Service and maintenance Changing the filter element WARNING NOTE Risk of injury, electric shock Always disconnect the mains plug from the Motor damage socket before performing maintenance work on Never operate the extractor without a filter ele- the machine! ment fitted as the motor may become damaged. All maintenance and repair work which requires the motor housing to be opened must only be Open the locking clips [2-2] and remove the top... -
Page 13: Accessories
Festool consumable material! ries list. The order numbers for the accessories and filters can be found in the Festool catalogue or on the Inter- Use only original Festool accessories and Festool net at "www.festool.com". consumable material intended for this machine be-...
Need help?
Do you have a question about the CLEANTEX CT 48 E LE EC and is the answer not in the manual?
Questions and answers