Automatic SA200-A Instruction Manual

200w 1/3 sheet sander

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

INSTRUCTION MANUAL

SA200-A

200W

1/3 SHEET SANDER

Table of Contents

Need help?

Do you have a question about the SA200-A and is the answer not in the manual?

Questions and answers

Summary of Contents for Automatic SA200-A

Page 1 INSTRUCTION MANUAL SA200-A 200W 1/3 SHEET SANDER...
Page 2: Table Of Contents
CONTENTS Warranty Power Tools Warranty Power Tools Introduction 1 Year Repair Warranty. Description of symbols Register your warranty at www.automatictools.com.au Specifications All warranty conditions can be found on the www.automatictools.com.au website or email General safety rules help@ globalpowerbrands.com or call 1800 909 909. Safety Warnings for Sander Accessories Unpacking...
Page 3: Introduction
Introduction Description of symbols Your new AUTOMATIC power tool will more than satisfy The rating plate on your tool may show symbols. These your expectations. It has been manufactured under represent important information about the product or stringent AUTOMATIC Quality Standards to meet superior instructions on its use.
Page 4: General Safety Rules
This tool is double insulated. There are two independent radiators, ranges and refrigerators. There barriers of insulation to protect you from the possibility of is an increased risk of electric shock if your body is electric shock. earthed or grounded. c) Do not expose power tools to rain or General safety rules wet conditions.
Page 5 c) Prevent unintentional starting. Ensure the source and/or the battery pack from switch is in the off-position before connecting to power the power tool before making any source and/or battery pack, picking up or carrying the adjustments, changing accessories, or tool.
Page 6: Safety Warnings For Sander
pressure is applied and the motor slows resulting in i) Children should be supervised to ensure inefficient sanding and possible damage to the sander motor. that they do not play with the appliance. • When sanding wood, always connect the dust extraction 5) Service filter.
Page 7: Accessories
Unpacking Due to modern mass production techniques, it is unlikely that your AUTOMATIC Power Tool is faulty or that a part is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified.
Page 8: Assembly
Assembly to the port. When attaching the dust bag, push it onto the dust port firmly as far as it will go to prevent it from coming off during operation. WARNING: Always ensure that the tool is switched For the best results, empty the dust bag when it off and the plug is removed from the power point before becomes approximately half full, tapping it lightly to making any adjustments or maintenance procedures.
Page 9: Using The Sander
• Never force the tool. Excessive pressure may decrease WARNING: Do not use the sander in wet or damp the sanding efficiency, damage the abrasive paper or conditions. shorten tool life. Hold the tool firmly. Turn the tool on and To maximise the life of the motor do not use the sander wait until it attains full speed.
Page 10: Maintenance
sandpaper to eliminate the unwanted marks before going on to a finer grit and finishing the job. WARNING: Do not use the same sanding sheet for wood and metal. Metal particles become embedded in the sandpaper and will scour a wooden surface. Maintenance WARNING: When servicing, use only identical replacement parts.
Page 11 DISTRIBUTED BY: Global Power Brands International Pty. Ltd. PO Box 413 Mooroolbark VIC 3138 ABN. 39 131 999 914 Ph. 1800 909 909 help@globalpowerbrands.com...