Vantage Point Products RUGGED-EYES How To Use Manual

WIRELESS SD CAMERA
PROTECTIVE HOUSING
WEATHER CAP
Step 1 Camera: Always make sure your camera is fully charged before use (be careful not to
overcharge the unit).
Step 2
DVR: Always switch on your wireless DVR before switching on the wireless camera, so that
you can test that signals are being transmitted and received correctly. Simply press the
"standby" button for 3 seconds to switch the DVR on (or off).
Step 3
Camera: Press and hold down the on / off button for 3 seconds, then releasing it will switch
the wireless camera on - the LED's will also turn on initially. You will see images appear on
the wireless DVR screen.
Step 4
Camera: Pressing the on / off button for one second will engage the higher bright LED's.
Step 5
Camera: Pressing the on / off button for one second again will switch off the LED's, but the
camera will continue to send data to the wireless DVR.
Step 6
Camera and DVR: To switch off the wireless camera press and hold the on / off button for 3
seconds, then release it. The images on the DVR screen will disappear, and the DVR screen
will show static, indicating it has stopped receiving signals from the wireless camera. Then
switch off your DVR.
VANTAGE POINT PRODUCTS USER GUIDE – RUGGED-EYES AND MEMOR-EYES – images and wording
copyright © 2015
HOW TO USE RUGGED-EYES:
WIRELESS SD CAMERA
ANTENNA
POWER INLET
ON / OFF BUTTON
SECURE MOUNT