Assembling The Smart Module; Adjusting The Airplane's Control Surfaces - PowerUp 3.0 User Manual

Assembling the Smart Module
Insert the front of the airplane's keel (the nose
of the airplane) into the clips of the Smart
Module, making sure that the keel goes all the
way into the clips. The clips should be on the
underside of the plane, and the fin should be
between the wings.
Note: If the rod of the Smart Module sticks out above the body of the
airplane, you can tape the rod to the plane.
20 | PowerUp 3.0 User Guide
Adjusting the Airplane's Control Surfaces
• Elevator tabs: Raise the elevator tabs slightly.
• Wings: Raise the wings slightly
to create a small dihedral angle.
Dihedral
Anhedral
PowerUp 3.0 User Guide | 21