Advertisement
OPERATION INSTRUCTION
1.
Measure rice with provided measuring cup and wash rice in another container. (1 measuring cup around
150 g)
2.
Clean and dry the surface of the inner pot then put it into the main body of the rice cooker. Ensure rice is
distributed evenly in the inner pot. To make the inner pot fully contacted with the heating plate, slightly turn
it left and right 2 or 3 times. Then close the upper lid and press it slightly until a sound of "click".
3.
Plug one end of power cord (appliance coupler) into rice cooker and the other into the power outlet (power
plug).
4.
After connecting power, the cook/standby indicator will be on. Then press the control button to start
cooking rice.
When cooking rice is finished, a "click" sound will be heard and the control button will be rebounded. The
5.
cook/standby indicator will be off and the warm indicator will be on which means the appliance is in keep
warm status.
Notes
When cooking and keep warm are done, please unplug the power cord.
Please unplug the power cord before take out the inner pot and food.
MAINTENANCE INSTRUCTION
1.
Do not directly wash rice by the inner pot in order to avoid damage of the non-stick coating and deforming
of the inner pot.
2.
Only use the provided rice scoop and clean the inner pot with a soft sponge to protect the coating.
TROUBLE SHOOTING
Malfunction
1
Indicator
does
not work
2
Rice is under
cooked
SPECIFICATION
Model No.
Product name
Rated Voltage/Frequency
Rated Power
Rated Capacity
Dimension (W x H x D)
Causes
The
rice
cooker
connected with power source
1: The inner pot is tilted on one
side
2: Impurities exist between the
inner pot and heating plate
3: Inner pot is deformed
FRC0413
Rice cooker
220-240V~, 50/60Hz
350W
0.4L
250*228*222mm
Solution
is
not
Check whether the control button, plug, socket, fuse
and power cord is in good condition and make sure
the plug is firmly inserted into the socket. If
problem still exists, please send it to the designated
repairing center
1: Slightly turn around the inner pot to make it level
2: Clean the impurities
3: Please send it to the designated repairing center
5
Advertisement
