Advertisement
Quick Links
Advertisement
Related Manuals for Ready Net WR300NQ
Summary of Contents for Ready Net WR300NQ
-
Page 1: Wireless Router
Wireless Router Quick Start Guide Rev. 1.0a Model: WR300NQ... - Page 2 Step One: Hardware Connection 1. If you have xDSL Broadband internet access, connect your hardware as shown in the following diagram: 2. If you have Residential Broadband internet access, connect your hardware as shown in the following diagram:...
- Page 3 After the hardware connections have been completed, check the status of the LED Indicators using the following table: LED Indicator Description Normal Status POWER Power Status Indicator Steady Light Steady Light or System status Indicator Slow Flashing Wireless Status Steady Light or WLAN Indicator Slow Flashing...
- Page 4 Step Two: Set up the computer The network settings of your computer operating system must be set to the following: Ÿ Obtain an IP address automatically. Ÿ Obtain DNS Server Address automatically. 2. Type “http://192.168.1.1” in the Address field of your web browser and press the “Enter”...
- Page 5 3. After a successful login, the router setting Wizard will appear, click the “Next” button. 4. Determine which of the three listed ISP access methods is used by your Internet service provider. 5. Select the Internet Parameter choice, and click the “Next” button. If you chose Static IP: If your broadband Internet service provider assigned you a fixed IP address, enter the Server IP Address, Subnet Mask and DNS parameters...
- Page 6 If you chose Dynamic IP: If your broadband Internet service provider delivers a dynamically assigned IP address, the wireless router can automatically obtain the IP address from your broadband Internet service provider. Click the “Next” button. 6. Set the wireless parameters: SSID: Names the wireless router so it can be identified by devices that access it.
- Page 7 Step Four: Setting up Your Wireless Devices Your 802.11x wireless devices must be configured to work with your wireless router. If you need to set up a computer to access the wireless router, make sure the computer has an internal or external wireless adapter. Make sure the wireless adapter drivers have been installed on the computer.
Need help?
Do you have a question about the WR300NQ and is the answer not in the manual?
Questions and answers