Table of Contents
Advertisement
Flash Mode
You can select a flash mode to match the shooting conditions.
1
Press the m (flash pop-up) button.
The flash pops up.
The flash does not fire while it is lowered. W is displayed to indicate that the
flash does not fire.
2
Press the multi selector H (m).
3
Select the desired flash mode
(A33) and press the k button.
If the setting is not applied by pressing the
k button within a few seconds, the
selection will be canceled.
B
Lowering the Flash
Push the flash down gently to lower the flash until it clicks into place when not in use
(A11).
32
Auto
Hide quick links:
Advertisement
Table of Contents
