Using The Built-In Flash - Nikon D7200 Quick Setup Manual

Press playback Press to delete
to review the current
images image
Change magnification. Press the Zoom In button repeatedly to zoom in
n
on the image displayed; the Zoom Out button reduces the image. (Both
buttons are located to the left of the color LCD.) A thumbnail representa-
tion of the whole image appears in the lower-right corner with a yellow
rectangle showing the relative level of zoom. At intermediate zoom posi-
tions, the yellow rectangle can be moved around within the frame using
the multi selector.
Exit image review. Press the Playback button again, or just tap the shut-
n
ter release button to exit playback view.

Using the Built-in Flash

The built-in flash is easy enough to work with that you can begin using it right
away, either to provide the main lighting of a scene or as supplementary illumi-
nation to fill in the shadows.
Activating flash. To use the built-in flash in Manual, Aperture-priority,
n
Shutter-priority, or Program modes, just press the flash pop-up button
(shown in Figure 1.13). When the flash is fully charged, a lightning bolt
symbol will flash at the right side of the viewfinder display.
In P and A modes. When using P (Program) and A (Aperture-priority)
n
exposure modes, the D7200 will select a shutter speed for you automati-
cally from the range 1/250th to 1/60th seconds. You can select an aper-
ture, and the flash exposure will be calculated automatically.
Chapter 1
Zoom Zoom
in out Reverse
Quick Setup Guide
n
Figure 1.12
Review your images.
Forward
Change info display
15