Accessories; Turning On And Off; Battery Charging; Run Time - Laser MID-743 Quick Operation Manual

ACCESSORIES

1 x 7" MID-743, 1 x DC Power Adaptor with USB socket, 1 x Micro USB/DATA cable, 1 x User
Guide

TURNING ON AND OFF

To turn ON, PRESS and HOLD the POWER button until the screen turns ON.
To turn OFF, PRESS and HOLD the POWER button until the power screen appears. Then select
Power Off.
Note: At any time you can press the POWER BUTTON to enter Snooze mode or to wake from Snooze
mode.

BATTERY CHARGING

You can charge your MID-743 using the supplied DC Power Adaptor and USB/DATA cable.
You will be alerted when the battery charge falls below 15%. If the battery is completely
depleted the MID-743 will automatically turn off.
Note: If the battery has been completely exhausted, it may take a few minutes to switch the MID-743
on once charging has begun. The MID-743 can be used during charging however this may increase
the time needed to fully charge the battery.

RUN TIME

Run time of portable devices such as this MID-743 can be extended by reducing the screen
brightness, turning off Bluetooth function, turning off the Location function, turning off WiFi
when not in use, turning off Apps that are not required and manually turning the screen off
using the power button when not in use.

5 POINT TOUCH-SCREEN

The MID-743 has 5 different touch screen behaviours.
1-TAP
2- TAP and HOLD
3-DRAG and DROP
4-DOUBLE TAP
5-SLIDE/SWIPE

SLEEP MODE

During prolonged inactive use where no buttons have been pressed, the screen will turn off
automatically to conserve power. Press the POWER button to wake the MID-743.
Note: This can be adjusted in Display option under Settings.
5
QUICK OPERATION GUIDE
Tap once to select or start a function, option or application
Tap and hold to select or start a function
Tap then drag an item and drop it to a location
Double Tap an item twice to select or start a function
Tap then slide an item up, down, left or right
OR
MID-743