Dismantling Instructions & Service Positions; Dismantling Instructions - Philips HTS5500/37/55 Service Manual

EN 8 2. HTS5500C/37/55
2.

Dismantling Instructions

2.1 Dismantling of the SD5.5_5dis changer
1) The tray can be manually open by inserting a minus
screw drive and push the lever in the direction as shown
in Figure 1 to unlock the tray before sliding it out.
2) Slide out the tray and remove the Cover Tray (pos 110) as
shown in Figure 2.
Push lever in direction
shown to open the
tray manually
3) Loosen 7 screws to remove the Front Top.(pos 240)
- 2 screw each on the left & right side (pos 272)
- 3 screws A behind
4) Loosen 6 screws G (see Figure 4a and 4b) to remove the
SD5.5_5dis changer.
Dismantling Instructions & Service Positions
Figure 1
Figure 2
2.2 Dismantling of the Tuner Module, AV Board,
SD6.3 ,Front Board, PSU Module
1) Loosen 2 screw B (see Figure 3a) to remove the Tuner
Module (pos 1040).
2) Loosen 4 screws C (see Figure 3b) to remove
AV Board 1.
3) Loosen 4 screws D (see Figure 3c) and 2 screws H (see
Figure 4a) to remove AV Board 2.
4) Loosen 2 screws E (see Figure 4a) to remove the PSU
Module.
5) Loosen 6 screws I (see Figure 4a) and 4 snap hooks to
remove Front Board.
- 1 snap hook each on the left & right side (pos 161).
- 2 snap hooks on the bottom side (pos 161).
A
B
Figure 3a
C
Figure 3b
D
Figure 3c