Advertisement
Quick Links
Contents
•
Features.............................................1
•
Package Contents......................................2
•
Product overview and function.................3
•
•
•
Download and installation App................6
•
How to use "MicFi" app..........................10
USB/WiFi Streamer
Instruction Manual
Advertisement
Summary of Contents for Mic-Fi MicFiBOX
-
Page 1: Table Of Contents
USB/WiFi Streamer Instruction Manual Contents • Features……………………………………...1 • Package Contents………………....….2 • Product overview and function….………….3 • Led indicators………………… ………...….4 • How to connect the USB/WiFi Streamer..…..5 • Download and installation App……….……6 • How to use “MicFi” app…………………..10... -
Page 2: Features
· INTRODUCTION Wi-Fi Digital box streamer is a very innovative device that allows to stream from USB to Wi- Fi all kind of images taken from a digital USB device. It can be used with digital USB microscopes (i.e. Dino-Lite) but even with other devices like USB endoscopes or USB eyes. It breaks the conception of traditional USB digital microscope to realize the following functions: measurement, conservation, copy and transfer of images and video which are difficult for a traditional microscope. -
Page 3: Package Contents
·DINO-LITE COMPATIBILITY Series Resolution Premier 1.3 Mpixels Premier R4 1.3 Mpixels Premier 5 Mpixels Edge 1.3 Mpixels SXGA Dino-Lite is a registered trade mark from third parties and is mentioned for descriptive use only · PACKAGE CONTENTS USB/WiFi Streamer Power source (5V, DC 1A) USB cable... -
Page 4: Product Overview And Function
· PRODUCT OVERVIEW & FUNCTION 1. Mini USB port – This allows to be connected a mini USB cable carrying power from power source. 2. Power Switch – This power switch turns On and OFF the USB/WiFi Streamer. 3. WiFi Indicator – Read the information in the “LED indicators” section of this manual. 4. -
Page 5: Led Indicator
· LED INDICATOR LED COLOR STATUS DESCRIPTION Charege Indicator NO light The device is powered off or otherwise is not getting power Charege Indicator GREEN SOLID The battery is charging WiFi Indicator NO light The device is powered off WiFi Indicator BLUE BLINKING The device is trasmitting or... -
Page 6: How To Connect The Usb/Wifi Streamer
· HOW TO CONNECT USB/WIFI STREAMER Connect the mini USB cable to USB/WiFi Streamer and to power source. PLEASE MAKE A CHARGE OF AT LEAST 3HOURS. DO NOT USE USB/WIFI STRAMER during the charge of the battery Disconnect USB cable for the charge the battery and connect your USB device to USB interface ( position n.6) and power ON the USB/WiFi Streamer by Power switch (position n.2) -
Page 7: Download And Installation App
“12345678” and click Ok. Once connected, please wait for about 5 seconds to open the “Mic-Fi” application to see your images. If there is no video display, please close and restart “Mic-Fi” app again. The Wi-Fi indicator LED flashes and video stream signal should be displayed in the app. - Page 8 Click in the window to pop-up the screen: Select “Wireless AP Client Mode”, click to pop-up the screen: Click till your destre network SSID appears, and click it to pop-up the screen: Insert the password and click “Next”. Now you can use USB/WIFI streamer and Internet at the same time...
- Page 9 WiFi: Security setup Open an internet browser, input http://10.10.1.1 and click “enter”. A pop-up window will require you to enter a username and password, please enter: admin and admin, and then this window should appear: Click on...
- Page 10 Click “Network Security Settings” to pop-up the screen on the right. Enter your desired Network Name (SSID) and password in “WPA-PSK Key” and “Re-Enter”, and click “Next”. The setting is done, now you can re-connect the new SSID Wi-Fi by entering the new password.
-
Page 11: How To Use "Micfi" App
Search “MicFi” in App Store to download and install it Click the icon to display video Warm-up Tips: If the live video is black or slow, please restart “Mic-Fi” app again. Capture photo or record video (The pixel resolution has to be set at 640x480 when recording video). - Page 12 Resolution Setting. (When changing the resolution, please wait until the illumination LED is off and lights up again – it takes about 5 seconds). Click for power on Snapshot Add new folder Measurement & Calibration To obtain the accurate measurement data for each magnification, please calibrate before any measurement function.
- Page 13 Enter the value of lenght and click “ok”: Now the calibration is completed. Click on screen again, you can make measurement features accurately on the live video at this same focus. (Don’t adjust again the “Focus & Magnification wheel”). If the new photo object is not in focus, please only adjust the distance between the microscope and the object until the photo is clear.
- Page 14 Search “MicFi” in Google paly to download and install it Click the icon to display video Warm-up Tips: If the live video is black or slow, please restart “Mic-Fi” app again. Capture photo or record video (The pixel resolution has to be set at 640x480 when recording video).
- Page 15 Power on snapshot. Rename the photo first to save it. Default setting Measurement & Calibration See iPhone/iPad measurement and calibration information...
Need help?
Do you have a question about the MicFiBOX and is the answer not in the manual?
Questions and answers