Speaker Adjustment; The Front Control Panel; Standby Switch And Leds - Adam EA-SX Operation Manual

4. Speaker Adjustment

4.1

The front control panel

On the front of the amp unit you will find a control panel that allows detailed
fine-tuning of your loudspeakers to your particular room acoustics and personal
listening preferences. The following tips are intended to assist you at using the
controls in the best manner.
Please note that using the controls may have a great impact on the overall sound
characteristics of your loudspeakers. We recommend using the controls with
utmost care and only after several audio tests with familiar recordings.
4.2

Standby switch and LEDs

While the main power switch can be found on the rear of
the external amp unit, there is also a switch for power on/
standby on the front panel. In standby mode, the switch glows
orange, in power on mode it glows green.
To the right of the standby switch you can find
two LEDs:
• In case of an overload, the OL LED will flash red. The protective circuit will safe
your speaker from damage.
The D/A LED on the EA-SX is without function as the D/A converter option is not
•
available with the use of the external amp unit.
8