iHome iBT3 Instruction Manual page 2

Introduction
Thank you for purchasing the iHome iBT3. This product is designed to provide high quality wireless sound
for your iPad, iPhone, iPod, computer, or other Bluetooth audio device. A bike mount is included for sound
on the go.
This instruction booklet explains the basic operation and care of the unit. Please read it carefully and keep
for future reference.
IMPORTANT INFORMATION ABOUT SPLASH RESISTANT USE
For proper splash-resistant operation, make sure the seal on the left side of the unit is completely flush
with the unit by pressing along the entire edge of the seal until it is completely and securely in place.
• The unit is IPX4 rated, meaning it will repel a stream of water for up to 5 minutes.
• DO NOT immerse the unit in water.
• Make sure seal and surrounding surfaces are completely dry before opening seal to prevent moisture
from damaging the internal electronics.
• Keep seal free of dirt, sand, or other objects that can interfere with proper sealing. If for any reason the
seal is not making a tight seal, water may enter the unit.
• DO NOT clean unit with oily soaps or use chemicals or solvents. Clean with damp cloth.
WARNING: batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as
sunshine, fire or the like.
iBT3