Panasonic viera TX-P42S30Y Operating Instructions Manual page 17

Menu Item
Audio Preference
SPDIF Selection
HDMI1 / 2 / 3 Input
SPDIF Delay
Reset to Defaults
Timer Programming
Off Timer
Auto Standby
Eco Navigation
VIERA Link
HDMI Content Type
AV1 out
Power on Link
Power off Link
Standby Power Save
Intelligent Auto
Standby
Download
Child Lock
Adjustments / Configurations (alternatives)
Selects the initial setting for audio tracks [Auto] / [Multichannel] / [Stereo] / [MPEG]
[Auto] : Automatically selects the audio tracks if programme has more than two tracks.
The priority is given in the following order - Dolby Digital Plus, HE-AAC, Dolby
Digital, MPEG.
[Multichannel] : The priority is given to multi-channel audio track.
[Stereo] : The priority is given to stereo (2ch) audio track.
[MPEG] : The priority is given to MPEG.
SPDIF : A standard audio transfer file format
Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT and
HDMI2 (ARC function) terminals [Auto] / [PCM]
[Auto] : Dolby Digital Plus, Dolby Digital and HE-AAC (48 kHz) multi-channel are output
as Dolby Digital Bitstream.
MPEG is output as PCM.
[PCM] : Digital output signal is fixed to PCM.
Select to fit the input signal [Digital] / [Analogue]
[Digital] : HDMI cable connection
[Analogue] : HDMI-DVI adaptor cable connection
Adjusts the delay time of the sound output from DIGITAL AUDIO OUT and HDMI2 (ARC
function) terminals if the sound does not synchronize the image
Press the OK button to reset the present Sound Mode, [Balance], [Headphone Volume]
and [Surround] to the default settings
Sets a timer to remind watching or record forthcoming programmes
Sets the time until the TV automatically goes to Standby mode
[Off] / [15] / [30] / [45] / [60] / [75] / [90] (minutes)
Sets the time the TV automatically goes to Standby mode when no operation is
performed for the selected times [Off] / [2] / [4] (hours)
Automatically sets the TV to the most suitable energy-saving mode
Sets to use VIERA Link functions [Off] / [On]
Adjusts the picture settings according to the content type signal from the connected
equipment via HDMI cable [Off] / [Auto]
Chooses the signal to be transmitted from the TV to Q-Link [TV] / [AV2] / [Monitor]
[Monitor] : Image displayed on screen
Sets to use Power on Link function [Off] / [On]
Sets to use Power off Link function [Off] / [On]
Controls the power consumption in Standby mode of the connected equipment to
reduce the consumption [Off] / [On]
Makes non-watched or non-used connected equipment go into Standby mode to
reduce the power consumption
[Off] / [On (With reminder)] / [On (No reminder)]
Downloads channel, language, country / region settings to a Q-Link or VIERA Link
compatible equipment connected to the TV
Locks a channel / AV input to prevent access to it
17