Advertisement

Quick Links

Please visit
www.outboundsports.com
WARNING: Before starting any exercise program. We strongly suggest you visit your doctor for a complete physical and to
discuss your exercise plans.
Introduction
Thank you for purchasing the GPS Bike computer. This GPS Bike computer is packed with personal Training features like
speed, trip time, laps, etc. Bike computer features include but not limited to the following:
12/24H Time format
Chronograph
World time
Dual Time T1 and T2
5 daily Alarms
Bike mode
Data mode
Set modes
This Bike Computer can communicate with a PC to store and review your performance.
This Bike computer uses a rechargeable battery that can be charged through USB port of your PC.
Caring for your GPS Bike computer:
Clean your GPS Bike computer with a dampened cloth preferably with mild detergent solution. Wipe dry using a dry cloth. Do
not use chemical cleaners and solvents that may damage plastic components.
Do not store your GPS Bike computer to prolonged exposure to extreme temperatures as this may result to permanent
damage to your unit.
About GPS:
Global Positioning System (GPS) is a satellite- based navigation system made up of a network of 24 or more satellites. GPS
works best in clear weather condition, anywhere in the world, 24 hours a day. Tall buildings may interfere with GPS accuracy.
When 3 satellite signals are received, the Bike computer will have 2D GPS fixed (Latitude and Longitude). When 4 or more
satellite signals are received, the Bike computer will have 3D GPS Fixed.

Getting Started

Step 1) Know your Bike computer:
Push button location:
for additional information.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GR-C100 and is the answer not in the manual?

Questions and answers

Summary of Contents for Outbound GR-C100

  • Page 1: Getting Started

    Please visit www.outboundsports.com for additional information. WARNING: Before starting any exercise program. We strongly suggest you visit your doctor for a complete physical and to discuss your exercise plans. Introduction Thank you for purchasing the GPS Bike computer. This GPS Bike computer is packed with personal Training features like speed, trip time, laps, etc.
  • Page 2: Step 2) Charging The Battery

    Step 2) Charging the Battery: Charge the unit for at least 4 hours before first use. The length of time for a fully charged battery will last depending on the actual usage. It is recommended to regularly re-charge your battery every 1-2 months even if it is not used to maintain good battery condition.
  • Page 3 Notes: • This symbol below means the digits are blinking. • Press S1/S11 in the succeeding setting screens to change the value of blinking digits • Press S7 to exi 4.2) AUTO LAP setting: Notes: • Auto Lap setting options: (0.5, 1, 2, 3, 4, 5 and OFF). Default is 1 KM. •...
  • Page 4 4.4) UNIT setting: 4.5) USER setting: Note: Weigh range: 20 to 255 Kg (44 to 561 Lbs) default is 65 Kg (143 lbs) Height range: 91-241 cm (3’”-7’11” ft’ inch”) default 170 cm Age Range: 7 to 99. Default is 25 Gender: Male or Female, default is Male 4.6) NIGHT mode setting: 4.7) Contrast setting:...
  • Page 5 4.9) ALARM setting: 4.10) ODOMETER setting: 4.11) VIEW setting: Note: • You can select the following information to display in Line 2 and Line 3 while it is blinking by pressing S1/S11: Speed, Calorie, Odometer, Clock, Chrono, and Distance. 4.12) TIME, NIGHT, CONTRAST, & CHIME, can also be set in TIME SET mode. 4.13) AUTO LAP, UNIT, USER, ODO, and VIEW can also be set in BIKE SET mode.
  • Page 6: Step5) Acquire Satellite Signals

    4.14) ALARM can also be set in ALARM SET mode. Step5) Acquire Satellite signals: In order to get the correct time of day and begin using your Bike GPS computer, you have to acquire the Satellite signals. It may take a few minutes to get the signals. Go outside to an open area away from tall buildings and trees.
  • Page 7 • Press and hold S7 from any mode for 2 seconds will turn OFF the GPS. • When CHRONO is stopped or save, after 10 minutes the Bike computer will auto return to Time view. GPS will be on standby for 1 hour. GPS ring icon blinks during this time. After 1 hour, the GPS will be turned OFF and the GPS ring icon is also OFF.
  • Page 8 Notes: • Bike computer will take auto lap based on auto lap settings. 6.1.3) How to Change views in Line 1: Notes: • Line 2 and Line 3 information can be changed in SET mode / VIEW. • The computer will remember your previous screen view the next time you come back to BIKE mode. •...
  • Page 9 • While in Bike mode, then the GPS signal suddenly becomes weak lost for any reason, the Bike computer will display LOST GPS signal until it receives GPS signal again. • Maximum of 15 hours track record / 30 data files/ 100 laps for each data file can be saved in memory. 6.2) Using Chronograph mode: BIKE &...
  • Page 10: Time Mode

    Note: • When CHRONO is stopped or save, after 10 minutes the Bike computer will auto return to Time view. GPS will be on standby for 1 hour. GPS ring icon blinks during this time. After 1 hour, the GPS will be turned OFF and the GPS ring icon is also OFF.
  • Page 11 • How to view the DATA details: How to delete your Data: Data numbering system/ Legend: Sample data number: D03 03 1031 – 1 02 G Data Total number of files File number counter Month Date Refer to Time 1 or 2 for time 2 File number of the day GPS workout, H for INDOOR workout...
  • Page 12: Alarm Mode

    ALARM mode • How to go to ALARM mode: Battery: The Bike computer is using a rechargeable Lithium Ion battery that will require approximately 4.0 hours charging time using the USB cable. While battery is charging, the Bike computer cannot be used and all buttons are disabled. User needs to recharge the battery when the Bike computer indicates a “low battery”.
  • Page 13 GPS NE PRO PC SOFTWARE Your GPS Bike Computer comes with PC software. This software is compatible with the following operating system: • Windows 7 • Windows XP SP 1, 2, 3 • Windows Vista SP 1, 2 • Windows 2000 SP 4 •...
  • Page 14 You click enter to view the downloaded data. The HOME page of the PC software will open displaying various information, Data file, and settings. Click on any of these icons to go directly to the desired data, information or settings. 10) The PC software will then display the data that you have selected.
  • Page 15 • The PC software will display the various parameters to be set. Fill in all the required information. • After filling in all the required information, click the Synchronize with your computer button at the bottom right of the screen. •...

Table of Contents