Table of Contents
Advertisement
Quick Links
COMPRESSOR DRIVEN WINE COOLER
This manual contains important information including safety and installation instructions
about the appliances. Please read it carefully before use and follow all the safety information &
instructions.
It is recommended that you keep this manual for reference so that you are familiar with the
operation of the appliance.
INSTRUCTION MANUAL
DX-7.22SK
DX-19.58SK
DX-24.56BBK
DX-24.56BSK
DX-41.130BBK
DX-41.130BSK
DX-46.145BK
DX-46.145SK
DX-94.270DBK
DX-94.270DSK
DX-181.490DBK
DX-181.490DSK
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for DynaVox DX-7.22SK
- Page 1 INSTRUCTION MANUAL COMPRESSOR DRIVEN WINE COOLER DX-7.22SK DX-19.58SK DX-24.56BBK DX-24.56BSK DX-41.130BBK DX-41.130BSK DX-46.145BK DX-46.145SK DX-94.270DBK DX-94.270DSK DX-181.490DBK DX-181.490DSK This manual contains important information including safety and installation instructions about the appliances. Please read it carefully before use and follow all the safety information &...
-
Page 2: Table Of Contents
INSTRUCTION MANUAL --CONTENTS-- IMPORTANT SAFETY INFORMATION .......................2 STRUCTURE AND INSTALLATION ........................3 BUILT-UNDER SERIES (Built under a kitchen surface) .................... 3 BUILT-IN-COLUMN SERIES (Built into a kitchen cabinet)..................5 FLOOR-STANDING SERIES ............................7 ACCESSORY INSTALLATION BEFORE OPERATION ....................8 UNPACKING AND CLEANING THE WINE COOLER ....................8 LOCK &... -
Page 3: Important Safety Information
INSTRUCTION MANUAL IMPORTANT SAFETY INFORMATION Before using the appliance, please properly position and install it as described in this manual. To avoid the risk of fire, electrical shock, or injury when using the appliance, follow these basic precautions: • The appliance is intended to be used exclusively for the storage of wine. •... -
Page 4: Structure And Installation
INSTRUCTION MANUAL STRUCTURE AND INSTALLATION The following pictures only show the structure of the appliance. The dimension and shelf quantity may differ among the models of the same series. BUILT-UNDER SERIES (Built under a kitchen surface) - Page 5 INSTRUCTION MANUAL...
-
Page 6: Built-In-Column Series (Built Into A Kitchen Cabinet)
INSTRUCTION MANUAL BUILT-IN-COLUMN SERIES (Built into a kitchen cabinet) Single Zone Structure 455mm Height --Installation Drawing 1 Before inserting the unit into the kitchen cabinet, please unscrew the original 4 leveling feet white), and screw the 2 short leveling feet black) , which are packed as an accessory, to the base of the unit. - Page 7 INSTRUCTION MANUAL Dual Zone Structure 885mm Height --Installation Drawing...
-
Page 8: Floor-Standing Series
INSTRUCTION MANUAL 885mm Height --Installation Drawing FLOOR-STANDING SERIES... -
Page 9: Accessory Installation Before Operation
INSTRUCTION MANUAL ACCESSORY INSTALLATION BEFORE OPERATION UNPACKING AND CLEANING THE WINE COOLER • Remove the exterior and interior packing materials. • Let the appliance stand upright for approximately 24 hours before connecting it to the power source, which helps to reduce the possibility of a cooling-system malfunction from movement during transport. •... -
Page 10: Operating The Wine Cooler
INSTRUCTION MANUAL OPERATING THE WINE COOLER WORKING CLIMATE • The appliance is designed for operating from SN to N climate (see below climate class chart). It is recommended to maintain the ambient around 22-25°C which helps the appliance working with less power consumption. -
Page 11: Control Panel
INSTRUCTION MANUAL • Recommended temperatures for chilling/storing your wines. Wine Type Recommender Temp. Red Wine 15 - 18ºC (59ºF-64ºF) Dry/White Wine 9 - 14ºC (48ºF-57ºF) Rosé Wine 10 - 11ºC (50ºF-52ºF) Sparkling Wine 5 - 8ºC (41ºF-46ºF) CONTROL PANEL • For Single Zone •... -
Page 12: Power On/Off
INSTRUCTION MANUAL POWER ON/OFF • When the appliance is plugged in to a power outlet, it powers on automatically. • Touch the power symbol and hold for 10 seconds to turn off (or turn on) the appliance. • Even if the unit is locked or unlocked, you can turn off the appliance by touching the power symbol hold for 10 seconds. -
Page 13: Selecting Fahrenheit (ºf) & Celsius (ºc) Display
INSTRUCTION MANUAL For Dual Zone • The temperature setting ranges are 5-12 ºC (41-54 ºF) for the upper zone and 12-22 ºC (54-72 ºF) for the lower zone. • You need to select the desired zone by touching the symbol before touching the symbols to set the desired temperature. -
Page 14: Care And Maintenance
INSTRUCTION MANUAL CARE AND MAINTENANCE CLEANING THE WINE COOLER • Turn off the power, unplug the appliance, and remove all items including shelves. • Wipe the inside surfaces with a sponge and baking soda solution. The solution should be about 2 tablespoons of baking soda to a quart (approx. -
Page 15: Troubleshooting
INSTRUCTION MANUAL TROUBLESHOOTING If you feel the appliance is out of order, follow these instructions to try to see if you can solve the problem simply by yourself before calling for service. PROBLEM PROBLEM PROBLEM PROBLEM PROBLEM POSSIBLE CAUSE / MEASURE PROBLEM POSSIBLE CAUSE / MEASURE PROBLEM POSSIBLE CAUSE / MEASURE PROBLEM POSSIBLE CAUSE / MEASURE... -
Page 16: Reverse The Door Swing
INSTRUCTION MANUAL REVERSE THE DOOR SWING FOR BUILT-UNDER SERIES Remarks: • Reversing the door is only available for a unit with 870mm height, and with control panel inside the cabinet. • The instruction is based on a unit with right door hinge installed already. •... - Page 17 INSTRUCTION MANUAL REVERSE THE DOOR SWING -Unscrew the Upper Right Hinge and Bottom Right Hinge from the cabinet. -Pull out the 6 Plastic Caps from the front left corner of the cabinet. And move them all to the right side. -Install the Upper Left Hinge and Lower Left Hinge to the left side of the cabinet.
- Page 18 INSTRUCTION MANUAL REVERSE THE DOOR SWING -Turn the door over by 180 (upside down) . -Insert the Support Rod into the lower hinge hole of the door. -Install the door to the left hinge side by tightening the Support Rod with the 2 screws.
-
Page 19: For Built-In-Column Series
INSTRUCTION MANUAL FOR BUILT-IN-COLUMN SERIES Remarks: • Reversible door is only available for a unit with control panel inside the cabinet. This instruction is based on a unit with Right Door Hinge installed already. All removed parts must be saved to do the door reinstallation. –... -
Page 20: For Free-Standing Series
INSTRUCTION MANUAL HOW TO REVERSE THE DOOR HINGES – Screw the 8 screws of Upper Left Hinge and Bottom Left Hinge tightly one by one; FOR FREE-STANDING SERIES Remarks: • The instruction is based on a unit with right door hinge installed already (the handle on the left side). •... - Page 21 INSTRUCTION MANUAL HOW TO REVERSE THE DOOR HINGES - Move the support rod (at the bottom of the door) from the right to the left side. Move the hinge hole cover (at the top of the door) from the left side to the right side. See Figure 2 & 3. - Pull out the lower hinge cover and take out the lower hinge by loosing the screws.
- Page 22 INSTRUCTION MANUAL HOW TO REVERSE THE DOOR HINGES - To reinstall the door to the opposite side, insert the door support rod to the bottom hinge through a washer K, and screw the upper hinge which has connected with the door. Finally, cover the hinges B as well as the hinge screw holes.
- Page 23 INSTRUCTION MANUAL HOW TO REVERSE THE DOOR HINGES - Remove the gasket to the left inner side of the door to expose the 2 handle screws B . Unscrew them in a counter-clockwise direction with a cross screwdriver, take out the screws and the washers C as well as the handle D .
- Page 24 INSTRUCTION MANUAL HOW TO REVERSE THE DOOR HINGES - install the 2 decoration screws A to the holes at the left side of the outer door (reverse of the steps for unscrewing it). See Figure 4 - Tidy and restore the gasket. --END--...
Need help?
Do you have a question about the DX-7.22SK and is the answer not in the manual?
Questions and answers