1. Manuals
  2. Brands
  3. Axiom Manuals
  4. Computer Hardware
  5. SBC8153
  6. User manual

Axiom SBC8153 User Manual

Pentium all-in-on pci-asi cpu card family
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SBC8153
Pentium All-in-One
PCI/ISA CPU Card Family
User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SBC8153 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Axiom SBC8153

Summary of Contents for Axiom SBC8153

  • Page 1 SBC8153 Pentium All-in-One PCI/ISA CPU Card Family User’s Manual...
  • Page 2 "        !    #                                       ! !     !            Copyright 1999 by AXIOM Technology Co., Ltd. All rights reserved. April 1999, Version C1 Printed in Taiwan Trademarks Acknowledgments AXIOM is a trademark of AXIOM Technology Co., Ltd.

  • Page 3: Esd Precautions

    This helps to discharge any static electricity on your body. ! Wear a wrist-grounding strap, available from most electronic component stores, when handling boards and components. SBC8153 Series Comparison Table Model SBC8153V SBC8153 SBC8153V-2M...
  • Page 4 ! Mini-DIN to DIN keyboard adapter cable x 1 ! Intel PCI IDE Driver and Flash Memory Utility Diskette x 1 ! C&T 65550 VGA Driver Diskette x 1 (SBC8153 does not include this driver disk.) Make sure that all of the items listed above are present.

  • Page 5: Table Of Contents

    T a b l e o f C o n t e n t s Chapter 1 Chapter 1 Introduction Introdu ction Chapter 1 Chapter 1 Introdu Introdu ction ction Features Features ........ Features Features ..............................................
  • Page 6 Chapter 5 Chapter 5 Chapter 5 Chapter 5 VGA Driver Installation VGA Driver Installation VGA Driver Installation VGA Driver Installation Installing Drivers for Windows 3.1 ....Installing Drivers for Windows 3.1 ....45 Installing Drivers for Windows 3.1 Installing Drivers for Windows 3.1 ....
  • Page 7 C h a p t e r 1 Introduction The SBC8153 CPU Card Family consists of PCI Pentium Industrial CPU cards based on the Intel 430TX chipset and is fully designed for harsh industrial environment. It features ZIF Socket 7 compatible with various processors from Intel, AMD and Cyrix.

  • Page 8: Features

    SBC8153 Pentium All-in-One CPU Card Family User’s Manual Features " CPU Speed 90~366MHz, Intel P54C, P55C/MMX, Cyrix 6x86, 6x86L, 6x86MX, MII, AMD K5, K6, K6-2, IDT C6, W2-3D " Intel 430TX PCIset " Up to 256MB system memory " Onboard VGA CRT/LCD "...

  • Page 9: System Memory

    SBC8153 Pentium All-in-One CPU Card Family User’s Manual NOTE: Hardware ver. C1 and later features Flash EEPROM upgrade from 128KB to 256KB. " System Memory: Up to 256MB FPM/EDO DRAM Four 72-pin SIMM sockets for DRAMs in 4MB, 8MB, 6MB, 32MB and...

  • Page 10: Intelligence

    SBC8153 Pentium All-in-One CPU Card Family User’s Manual IrDA Interface: Pin-header connector for the optional " IrDA external connector " VGA Display: (for SBC8153V and SBC8153V-2M only) C&T 65550 VGA chip onboard SVGA for CRT & Panel 32-bit PCI local bus...

  • Page 11: Board Dimensions And Layout

    SBC8153 Pentium All-in-One CPU Card Family User’s Manual Board Dimensions and Layout Introduction...
  • Page 12 SBC8153 Pentium All-in-One CPU Card Family User’s Manual           ...

  • Page 13: Jumpers And Connectors

    SBC8153 Pentium All-in-One CPU Card Family User’s Manual C h a p t e r 2 Jumpers and Connectors The onboard jumpers configure your CPU card according to the needs of your applications. If you doubt on the best jumper configuration, contact your dealer or sales reps.

  • Page 14: Jumper Settings

    SBC8153 Pentium All-in-One CPU Card Family User’s Manual Jumper Settings Making the proper jumper settings configures the SBC8153 to match the your application needs. The following tables show the correct jumper settings for the onboard devices. 2.1.1 CPU Voltage Selector: JP2, JP4, SW1 (1-4)
  • Page 15 SBC8153 Pentium All-in-One CPU Card Family User’s Manual Switch Vcore SW1 (1-4) Setting 1 2 3 4 3.3V 2.7V on on on off SHORT OPEN 1 2 3 4 3.3V 2.6V off on on off SHORT OPEN 1 2 3 4 3.3V...

  • Page 16: Cpu Frequency Selector: Jp6, Sw3 (1-4)

    SBC8153 Pentium All-in-One CPU Card Family User’s Manual 2.1.2 CPU Frequency Selector: JP6, SW3 (1-4) For Intel Pentium CPU For Intel Pentium CPU For Intel Pentium CPU For Intel Pentium CPU Bus Clock Switch SW3 (1-4) FREQ. Multiplier Setting 1 2 3 4...
  • Page 17 SBC8153 Pentium All-in-One CPU Card Family User’s Manual For AMD K5/K6/K6-2 CPU For AMD K5/K6/K6-2 CPU For AMD K5/K6/K6-2 CPU For AMD K5/K6/K6-2 CPU Bus Clock Switch SW3 (1-4) FREQ. Multiplier Setting 66MHz 1 2 3 4 K5-PR100 off off off off 1.5x...
  • Page 18 The thermal specification of the AMD K6-2-400 CPU has a maximum thermal power of 22.7W. When using the AMD K6- 2-400 on the SBC8153 CPU Card Family, make sure to install a compatible CPU cooling fan that can sustain such thermal power capacity.

  • Page 19: Clear Cmos Content: Jp5

    SBC8153 Pentium All-in-One CPU Card Family User’s Manual For IDT C6/Winchip2 CPU For IDT C6/Winchip2 CPU For IDT C6/Winchip2 CPU For IDT C6/Winchip2 CPU Bus Clock Switch SW3 (1-4) FREQ. Multiplier Setting 60MHz 1 2 3 4 C6-180MHz on on off on...

  • Page 20: Panel Signal Level Setting: Jpw1

    SBC8153 Pentium All-in-One CPU Card Family User’s Manual 2.1.5 Panel Signal Level Setting: JPW1 Setting Function Pin 2-3 5V (default) Short Pin 1-2 3.3V Short NOTE: This function setting is only available with the hardware ver. C1 and later. Jumpers and Connectors...

  • Page 21: Rs232/422/485 (Com2) Selection: J7, Jpw2/3/4

    SBC8153 Pentium All-in-One CPU Card Family User’s Manual 2.1.6 RS232/422/485 (COM2) Selection: J7, JPW2/3/4 COM1 is fixed for RS-232 use only COM2 is selectable for RS232, RS-422 and RS-485. The following table describes the jumper settings of this connector. COM2...

  • Page 22: Connectors

    SBC8153 Pentium All-in-One CPU Card Family User’s Manual Connectors The connectors on the SBC8153 allow you to connect external devices such as keyboard, floppy disk drives, hard disk drives, printers, etc. The following table and diagram list the function and location of each connector on the SBC8153.
  • Page 23 SBC8153 Pentium All-in-One CPU Card Family User’s Manual Connector Locations on the SBC8153 Jumpers and Connectors...

  • Page 24: Improvised Connectors

    SBC8153 Pentium All-in-One CPU Card Family User’s Manual 2.2.1 Improvised Connectors J1: Front Bezel Connector The front bezel of the case has a control panel that provides light indication of the computer activities and switches to change the computer status. J1 is a 20-pin header that provides interfaces for the following functions.
  • Page 25 SBC8153 Pentium All-in-One CPU Card Family User’s Manual Power LED and Keylock: Pins 11 - 15 Power LED and Keylock: Pins 11 - 15 Power LED and Keylock: Pins 11 - 15 Power LED and Keylock: Pins 11 - 15 The power LED indicates the status of the main power switch.
  • Page 26 SBC8153 Pentium All-in-One CPU Card Family User’s Manual J6: CPU Fan Power Connector J6 is a 2-pin header for a CPU fan. The fan must be a 12V fan. +12V J6: CPU Fan Power Connector J13: IrDA Connector This connector is used for an IrDA connector for wireless communication.

  • Page 27: Hardware Installation

    C h a p t e r 3 Hardware Installation This chapter provides information on how to use the jumpers and connectors on the SBC8153 in order to set up a workable system. CPU Installation The SBC8153 Industrial CPU Card supports a ZIF processor socket for Pentium-level processors.
  • Page 28 SBC8153 Pentium All-in-One CPU Card Family User’s Manual 2. Either SIMM1/SIMM2 or SIMM3/SIMM4 can be populated first. (SIMM1, (SIMM3, Total SIMM2) SIMM4) Memory 4MB × 2 8MB × 2 16MB 32MB 16MB × 2 64MB 32MB × 2 128MB 64MB × 2 16MB 4MB ×...

  • Page 29: Bios Setup

    SBC8153 Pentium All-in-One CPU Card Family User’s Manual C h a p t e r 4 Award BIOS Setup The Award BIOS installed in your computer systems ROM supports Intel/Cyrix/AMD processors in a standard IBM-AT compatible I/O system. The BIOS provides critical low-level support for standard devices such as disk drives, serial and parallel ports.
  • Page 30 SBC8153 Pentium All-in-One CPU Card Family User’s Manual ROM PCI/ISA BIOS CMOS SETUP UTILITY AWARD SOFTWARE, INC. STANDARD CMOS SETUP INTEGRATED PERIPHERALS BIOS FEATURES SETUP SUPERVISOR PASSWORD CHIPSET FEATURES SETUP USER PASSWORD POWER MANAGEMENT SETUP IDE HDD AUTO DETECTION PNP/PCI CONFIGURATION...

  • Page 31: Standard Cmos Setup

    SBC8153 Pentium All-in-One CPU Card Family User’s Manual Standard CMOS Setup Standard CMOS Setup choice allows you to record some basic hardware configurations in your computer system and set the system clock and error handling. If the Industrial CPU Card is already installed in a working system, you will not need to select this option.
  • Page 32 SBC8153 Pentium All-in-One CPU Card Family User’s Manual " Date The date format is: The day of week, from Sun to Sat, determined by the BIOS, is read only month The month, 1 to 12 The date, from 1 to 31 (or the maximum allowed in the...
  • Page 33 SBC8153 Pentium All-in-One CPU Card Family User’s Manual Press <PgUp>/<PgDn> to select a numbered hard disk type or type the number and press the <Enter> key. The hard disk will not work properly if you enter incorrect information for this field. If your hard disk drive type is not matched or listed, you can use Type User to define your own drive type manually.

  • Page 34: Floppy 3 Mode Support

    SBC8153 Pentium All-in-One CPU Card Family User’s Manual " Floppy 3 Mode Support This is the Japanese standard floppy drive. The standard stores 1.2MB in a 3.5- inch diskette. You have four options to choose: Disabled No 3 mode floppy drive installed. (default)

  • Page 35: Bios Features Setup

    SBC8153 Pentium All-in-One CPU Card Family User’s Manual BIOS Features Setup This section allows you to configure and improve your system and allows you to set up some system features according to your preference. ROM / PCI ISA BIOS BIOS FEATURES SETUP AWARD SOFTWARE, INC.

  • Page 36: Boot Sequence

    SBC8153 Pentium All-in-One CPU Card Family User’s Manual " Boot Sequence This field determines the drive that the system searches first for an operating system. The options are : C, CDROM, A A, C, SCSI F, A, SCSI D, A, SCSI...

  • Page 37: Chipset Features Setup

    SBC8153 Pentium All-in-One CPU Card Family User’s Manual " OS Select for DRAM > 64MB This option allows the system to access greater than 64MB of DRAM memory when used with OS/2 that depends on certain BIOS calls to access memory. The default setting is NON-OS/2.

  • Page 38: Video Bios Cacheable

    SBC8153 Pentium All-in-One CPU Card Family User’s Manual " Video BIOS Cacheable When enabled, access to video BIOS addressed at C0000H to C7FFFH are cached, provided that the cache controller is enabled. " 8 Bit I/O Recovery Time This field allows you to select the recovery time allowed for 8 bit I/O. By default, this field is set to 1 Clock.

  • Page 39: Power Management Setup

    SBC8153 Pentium All-in-One CPU Card Family User’s Manual Power Management Setup The Power Management Setup allows you to save energy of your system effectively. It will shut down the hard disk and turn OFF video display after a period of inactivity.

  • Page 40: Video Off Method

    SBC8153 Pentium All-in-One CPU Card Family User’s Manual " Video Off Method This field defines the Video Off features. V/H SYNC + Default setting, blank the screen and turn off vertical and horizontal Blank scanning Allows the BIOS to control the video display card if it supports the...

  • Page 41: Pnp/Pci Configuration

    SBC8153 Pentium All-in-One CPU Card Family User’s Manual PNP/PCI Configuration This option configures the PCI bus system. All PCI bus systems on the system use INT#, thus all installed PCI cards must be set to this value. ROM PCI/ISA BIOS PNP/PCI CONFIGURATION AWARD SOFTWARE INC.

  • Page 42: Load Bios Defaults

    SBC8153 Pentium All-in-One CPU Card Family User’s Manual " IRQ3/4/5/7/9/10/11/12/14/15, DMA0/1/3/5/6/7 assigned to These fields allow you to determine the IRQ/DMA assigned to the ISA bus and is not available to any PCI slot. " Used MEM base addr This field allows the user to set the base address and block size of a legacy (non-PnP) ISA card that uses any memory segment within the C800H and DFFFH address range.

  • Page 43: Load Setup Defaults

    SBC8153 Pentium All-in-One CPU Card Family User’s Manual Load Setup Defaults This option allows you to load the default values to your system configuration. These default settings are optimal and enable all high performance features. ROM PCI/ISA BIOS CMOS SETUP UTILITY AWARD SOFTWARE, INC.

  • Page 44: Integrated Peripherals

    SBC8153 Pentium All-in-One CPU Card Family User’s Manual Integrated Peripherals This option allows you to determine your hard disk configuration, mode and port. ROM PCI/ISA BIOS INTEGRATED PERIPHERALS AWARD SOFTWARE INC. IDE HDD Block Mode : Enabled IDE Primary Master PIO...

  • Page 45: Usb Keyboard Support

    SBC8153 Pentium All-in-One CPU Card Family User’s Manual " On-Chip Primary/Secondary PCI IDE These fields allow you either to enable or disable the Primary/Secondary controller. You might choose to disable the controller if you were to add a higher performance or specialized controller.
  • Page 46 SBC8153 Pentium All-in-One CPU Card Family User’s Manual 4.10 Supervisor / User Password These two options set the system password. Supervisor Password sets a password that will be used to protect the system and Setup utility. User Password sets a password that will be used exclusively on the system.

  • Page 47: Ide Hdd Auto Detection

    SBC8153 Pentium All-in-One CPU Card Family User’s Manual 4.11 IDE HDD Auto Detection This option detects the parameters of an IDE hard disk drive, and automatically enters them into Standard CMOS Setup screen. ROM PCI/ISA BIOS STANDARD CMOS SETUP AWARD SOFTWARE, INC.

  • Page 48: Save & Exit Setup

    SBC8153 Pentium All-in-One CPU Card Family User’s Manual 4.13 Save & Exit Setup This option allows you to determine whether to accept the modifications or not. If you type Y, you will quit the setup utility and save all changes into the CMOS memory. If you type N, you will return to Setup utility.

  • Page 49: Without Saving

    SBC8153 Pentium All-in-One CPU Card Family User’s Manual 4.14 Exit Without Saving Select this option to exit the Setup utility without saving the changes you have made in this session. Typing Y will quit the Setup utility without saving the modifications. Typing N will return you to Setup utility.
  • Page 50 SBC8153 Pentium All-in-One CPU Card Family User’s Manual This page does not contain any information.

  • Page 51: Vga Driver Installation

    VGA Driver Installation This chapter provides information on how to install the VGA drivers that come in the floppy diskette with your SBC8153 card. Please follow the instructions set forth in this chapter carefully. Please note that there must be relevant software installed in your system before you could proceed to install the VGA drivers.

  • Page 52: Changing Display Drivers

    SBC8153 Pentium All-in-One CPU Card Family User’s Manual 5.1.2 Changing Display Drivers Windows allows you to change your display drivers. To do so, select Windows Setup in the Main window. Then select Change System Settings in the Option menu. Click on the arrow at the end of the Display line to see the list of display drivers available.

  • Page 53: Installing Drivers For Windows Nt 3.5X

    SBC8153 Pentium All-in-One CPU Card Family User’s Manual Example 3: If you're not sure exactly where the drivers are, choose the "Browse..." button to find them. 7. The "Select Device" dialog box will appear. Select the adapter that corresponds to the one you installed in your machine and click OK.

  • Page 54: Installing Drivers For Windows Nt 4.0

    SBC8153 Pentium All-in-One CPU Card Family User’s Manual Installing Drivers for Windows NT 4.0 5.4.1 Driver Installation Once you are in the Windows NT 4.0 environment, follow the procedures below to install the VGA drivers in the diskette that comes with your CPU card.
  • Page 55 SBC8153 Pentium All-in-One CPU Card Family User’s Manual Click on List All Modes. From the list provided, select a new setting, then click OK or press ENTER. Click on Test to test the newly selected graphics mode. Follow the instructions given on the screen. A test screen should appear, followed by the Testing Mode window.
  • Page 56 SBC8153 Pentium All-in-One CPU Card Family User’s Manual           ...

  • Page 57: Intel Piix Bus Mast

    SBC8153 Pentium All-in-One CPU Card Family User’s Manual C h a p t e r 6 Intel PIIX Bus Master IDE Driver Installation This chapter describes the installation procedure for Intel PIIX Bus Master IDE Drivers for Windows 95. System Requirements This section describes system requirements for the PIIX Bus Master IDE Device Driver for Windows 95*.

  • Page 58: Installing The Software

    SBC8153 Pentium All-in-One CPU Card Family User’s Manual Installing the Software This subsection describes how to install the software on a system where Windows 95 is installed. NOTE: Record the location of the Windows 95* directory before installing the driver.
  • Page 59 SBC8153 Pentium All-in-One CPU Card Family User’s Manual Follow the screen instructions and use default settings to complete the setup when Windows 95* is re-started. Upon re-start, Windows 95* will display that it has found an Intel PCI Bus Master IDE controller hardware and is installing hardware for it.
  • Page 60 SBC8153 Pentium All-in-One CPU Card Family User’s Manual           ...

  • Page 61: Watchdog Timer Configuration

    SBC8153 Pentium All-in-One CPU Card Family User’s Manual A p p e n d i x A Watchdog Timer Configuration The function of the watchdog timer is to reset the system automatically and is defined at I/O port 0443H. To enable the watchdog timer and allow the system to reset, write I/O port 0443H.
  • Page 62 SBC8153 Pentium All-in-One CPU Card Family User’s Manual           ...

  • Page 63: I/O Port Address Map And Interrupt Request Lines (Irq)

    SBC8153 Pentium All-in-One CPU Card Family User’s Manual A p p e n d i x B I/O Port Address Map and Interrupt Request Lines (IRQ) I/O Port Address Map Each peripheral device in the system is assigned a set of I/O port addresses which also becomes the identity of the device.
  • Page 64 SBC8153 Pentium All-in-One CPU Card Family User’s Manual Interrupt Request Lines (IRQ) There are a total of 15 IRQ lines available on the Industrial CPU Card. Peripheral devices use interrupt request lines to notify CPU for the service required. The following table shows the IRQ used by the devices on the Industrial CPU Card.

  • Page 65: Connector Pin Assignments

    SBC8153 Pentium All-in-One CPU Card Family User’s Manual A p p e n d i x C Connector Pin Assignments Front Bezel Connector: J1 J1: Pins 1 Pins 1 Pins 1 Pins 1 – – – – 4 4 4 4...
  • Page 66 SBC8153 Pentium All-in-One CPU Card Family User’s Manual EIDE Connectors: J3, J4 J3 is the primary IDE connector and J4 is the secondary IDE connector. Signal Name Signal Name Reset IDE Ground Host data 7 Host data 8 Host data 6...
  • Page 67 SBC8153 Pentium All-in-One CPU Card Family User’s Manual Signal Name Signal Name Reset IDE Ground Host data 7 Host data 8 Host data 6 Host data 9 Host data 5 Host data 10 Host data 4 Host data 11 Host data 3...
  • Page 68 SBC8153 Pentium All-in-One CPU Card Family User’s Manual Floppy Drive Connector: J5 J5 of the SBC8153 is a 34-pin header and will support up to 2.88MB floppy drives. Signal Name Signal Name Ground RM/LC Ground Reserved Ground Reserved Ground Index...
  • Page 69 SBC8153 Pentium All-in-One CPU Card Family User’s Manual LCD Panel Connector: J8 J8 is a 41-pin (dual in line header) for flat panel LCD displays. The following shows the pin assignments of this connector. Signal Name Signal Name SHFCLK 3.3V 3.3V...
  • Page 70 SBC8153 Pentium All-in-One CPU Card Family User’s Manual Flat Panel Display Interface Pin Descriptions Color Mono Mono Mono Color Color Color Color Color Color Color 65550 TFT HR STN SS STN SS STN DD STN DD STN DD Pin# Pin Name...
  • Page 71 SBC8153 Pentium All-in-One CPU Card Family User’s Manual Parallel Port Connector: J9 The following table describes the pin out assignments of this connector. Signal Name Pin # Pin # Signal Name Line printer strobe AutoFeed PD0, parallel data 0 Error...
  • Page 72 Reserved Reserved Mouse data Reserved COM1 Serial Port: J12 J12, a DB-9 connector, is an onboard serial port of the SBC8153. The following table shows the pin assignments of this connector. Pin # Signal Name DCD, Data carrier detect RXD, Receive data...
  • Page 73 SBC8153 Pentium All-in-One CPU Card Family User’s Manual VGA CRT Connector: J14 J14 is a 15-pin VGA CRT connector. The pin assignments are as follows: Signal Name Signal Name Green Blue Reserved Reserved Reserved Reserved HSYNC VSYNC Reserved External Keyboard Connector: J15...
  • Page 74 SBC8153 Pentium All-in-One CPU Card Family User’s Manual USB Connectors: J19, J20 J20 Pin # J19 Pin # Signal Name USB- USB+ Ground Power Connector: P1 When using an AT compatible power supply, plug the power supply connectors into P1. Make sure the power supply connectors are connected in the right orientation.
  • Page 75 SBC8153 Pentium All-in-One CPU Card Family User’s Manual PC/104 Connector: CON1, CON2 CON1 and CON2 are dual-in-line pin headers that support PC-104 modules. CON1 consists of 64 pins and CON2 has 40 pins. The following table shows the their pin assignments.
  • Page 76 SBC8153 Pentium All-in-One CPU Card Family User’s Manual CON1 CON2 Connector Pin Assignments...

Table of Contents