Normal Setup 3 - Samsung NX10 User Manual

Camera settings menu

Normal setup 3(

Sensor
Cleaning
105
Video Out
Anynet+
(HDMI-
CEC)
HDMI Size
Firmware
Update
)
3
Sensor Cleaning: Removes the dust of sensor when executing this menu
Start Up Action: If set, the dust of sensor is removed whenever turning on the power. (On, Off*)
Since this product uses interchangeable lenses, the sensor may end up getting dust on it when changing
lenses. This can lead to dust particles showing up on pictures taken. It is recommended to not change
lenses when in a particularly dusty area. Also make sure to attach the lens cap onto the lens when not in use.
Select the output signal appropriate for the country when connecting the camera to an external
device (like monitor or TV).
NTSC* : US, Canada, Japan, Korea, Taiwan, Mexico, etc.
PAL (supporting only the BDGHI method) : Australia, Austria, Belgium, China, Holland, Finland,
Germany, England, Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland,
Thailand, Norway, etc.
When having connected to HDTV that supports Anynet+ (HDMI-CEC), the play function of camera
can be controlled with the TV remote controller (p. 90).
On* : The play function of camera can be controlled with the TV remote controller.
Off : The play function of camera can NOT be controlled with the TV remote controller.
The resolution on an HDTV can be changed when using an HDMI cable.
(In case of NTSC method : Auto*, 1080i, 720p, 480p
(In case of PAL method : Auto*, 1080i, 720p, 576p)
If the connected HDTV does not support the selected resolution, it is set to one level lower resolution.
This shows the version info of main body and lens and upgrades the firmware.
Body Firmware: This upgrades the firmware of camera body.
Lens Firmware: This upgrades the firmware of lens.
• You can upgrade the firmware by downloading it from www.samsungimaging.com or www.samsung.com.
• The Firmware update cannot be completed without fully charging the battery.
Please try updating the firmware by using a fully charged battery or adaptor(optional).
• After upgrading the firmware, the user customized options are reset to the default value.
(The date, time, language, and video output values are kept.)
* Default value