Advertisement
D
iagram of
WATER RESERVOIR
PERMANENT FILTER
BREWING BASKET
POWER ON SWITCH
PLATFORM
PERMANENT FILTER
FILTER BASKET
P
arts
TOP COVER
aDDED CoNVENiENCE
Attach the mug
lid onto the
handle of the
brew
MUG LID
DRINKING
MUG (OUTER
PLASTIC
LAYER)
DRINKING
MUG (INNER
STAINLESS
STEEL LAYER)
BOTTOM
RIM
4
IMPORTANT: Clean Your Oster
Brewer Before Use!
Wash stainless steel mug, mug lid and permanent brewing basket in water with
mild detergent.
Rinse them with water thoroughly. Follow steps below (using water only) to clean
the inside of your coffee brewer.
BREWING COFFEE
1. Open the top cover.
2. Fill the water reservoir with fresh tap water up to the MAX (500mL) indication.
Do not overfill.
3. Place mug on the platform.
Oster coffee mug has a maximum capacity of 500mL.*
*Oster
TM
coffee mug can work with Oster
sold separately ) blending iced coffee drinks. To prevent Oster
from being damaged, DO NOT fill the coffee mug exceed the MAX (430mL)
marking indicated inside the coffee mug. The MAX marking is applicable for the
coffee mug being used for blending only. Do not use the Oster
blend other than coffee drinks.
NOTE: To avoid risk of scalding or other injury, do not brew coffee using other
container.
4. Fill permanent filter with coffee ground. The permanent filter can contain
approximately 25g of coffee ground. The amount of coffee ground may vary
depending on the fineness of coffee ground.
5. Close top cover.
6. Press the Power ON switch "I" to switch on the appliance. The Power switch
will illuminate to indicate that brewing process has started. Let the coffee
passes through the filter into the mug. the coffee maker will automatically
shut off when brewing is completed. During brewing cycle, you can always
unplug to stop brewing.
NOTE: The Oster
MyBrew
Coffee Brewer can also be used to heat up water
®
TM
for instant food and beverages. O
TM
ster
containing coffee only. To ensure taste of coffee, do not use the stainless steel
coffee mug to contain foods or other drinks.
NOTE: Do not place anything other than water in the water reservoir. Before
making hot water, clean the permanent filter basket (see "Cleaning Instructions" on
Page 7).
NOTE: To brew a second mug of coffee, let the appliance cool down
completely. Fill the reservoir with water to shorten the cool down time. It takes
about 30 seconds to cool down the appliance.
MyBrew
Coffee
®
TM
®
MyBlend blender (BLSTPB series –
®
MyBlend blender
TM
coffee mug to
stainless steel coffee mug is designed for
5
Advertisement
