Connecting A Video Device - Ask Proxima C160 User Manual

Connecting a video device

Standard video connections
Plug the audio/video (A/V) cable's yellow connector into the video-out
connector on the video device. Plug the other yellow connector into the yel-
low Video 2 connector on the projector.
Plug a white connector into the left audio out connector on the video device
and plug a red connector into the right audio out connector on the video
device. Plug the remaining white connector into the left audio in connector
on the projector, and plug the red connector into the right audio in connec-
tor on the projector.
Connect the black power cable to the connector on the back of the projector
and to your electrical outlet.
NOTE: Always use the power cable that shipped with the projector.
Optional video connections
If the video device uses a round, four-prong S-video connector, plug an
S-video cable (sold separately) into the S-video connector on the video
device and into the S-Video 1 connector on the projector. Use the A/V
cable's audio connectors as described directly above (the yellow connectors
on the A/V cable are not used).
To connect a progressive scan EdTV or HD source, use the Component to
M1 adapter (sold separately).
connect A/V cable
connect power cable
connect S-video and video cables
13
R S-video 1
computer 1
audio out
computer 2 serial control
network
L
audio in video 2
audio in
monitor out
computer in video in
R S-video 1
computer 1
computer 2 audio out
network serial control
audio in L video 2
audio in
monitor out
computer in video in
R S-video 1
computer 1
computer 2 audio out serial control
network
L
audio in video 2
audio in
monitor out
computer in video in