Wi-Fi - Colorfly Colorful G808 3G User Manual

such as roaming.

Wi-Fi

Turn on the Wi-Fi network Fi network
1. Go to Settings > WIRELESS & NETWORKS and tap the switch on the right to disable or Go to Settings > WIRELESS & NETWORKS and tap
enable the Wi-Fi service. Fi service.
2. Tap and tap Scan when the Wi
networks.
3. Tap the required Wi-Fi network
network, enter the password in the displayed dialog box and tap Connect. network, enter the password in the displayed dialog box and tap Connect.
After you successfully connect to the Wi After you successfully connect to the Wi-Fi network, the Wi-Fi connection icon is displayed
on the status bar.
Add a Wi-Fi network
Some Wi-Fi networks do not broadcast SSIDs. Therefore, you need to add such Wi Fi networks do not broadcast SSIDs. Therefore, you need to add such Wi Fi networks do not broadcast SSIDs. Therefore, you need to add such Wi-Fi networks
when you are to use them.
1. Go to Settings > WIRELESS & NETWORKS and tap Go to Settings > WIRELESS & NETWORKS and tap
2. Set Network SSID and Security. Set Network SSID and Security.
3. Tap Save.
Delete Wi-Fi networks
The system automatically saves connected and added Wi The system automatically saves connected and added Wi-Fi networks and connects the tablet to
one of them when the tablet is used in the corresponding network coverage. To delete a Wi one of them when the tablet is used in the corresponding network coverage.
network, perform the following steps: erform the following steps:
1. Go to Settings > WIRELESS & NETWORKS and tap a connected Wi-Fi network to open it. Go to Settings > WIRELE
Scan when the Wi-Fi service is enabled to view the detected Wi Fi service is enabled to view the detected Wi-Fi
Fi network to connect to it. If a password has been set for the Wi to connect to it. If a password has been set for the Wi-Fi
on the right to disable or
Fi connection icon is displayed
in the upper right corner. in the upper right
Fi networks and connects the tablet to
To delete a Wi-Fi
Fi network to open it.
User Manual
8