Advertisement
1. Set the 3-Position Switch to position 3.
2. Take the iron (with the power unit) from the stand for ironing.
3. Replace the iron (with the power unit) back onto the stand after use and
set the 3-Position Switch to position 2.
1. Set the 3-Position Switch to position 1.
2. Take the iron (without the power unit) from the stand.
3. Always replace the iron onto the stand during ironing intervals.
4. When the iron is correctly placed on the stand, the power indicator will
illuminate.
5. If the soleplate needs heating up to the set temperature, the power
indicator lamp will be activated. As soon as the soleplate has regained the
set temperature, this light will go out.
6. It is advisable to use the iron in corded mode if you intent to steam iron
for a length of time or when applying numerous shots of steam, as this can
cause the soleplate to cool down considerably.
1. After use, lift the iron with the water inlet hole pointing downwards to
empty the remaining water from the water tank.
2. Insert the plug into the socket, then set the Temperature Control Dial to
"MAX" for 1~2 minutes to evaporate any remaining water, then unplug the
iron and let it cool down.
3. Set the 3-Position Switch to position 2.
6
Advertisement
